When performing `make precommit`, instead of running only a subset of
the Jerry Test Suite on full profile builds, run the whole suite, and
also run the compact subset of the suite on compact builds. Also, make
CI perform the same tests.
Related issue: #879
Related PR: #912
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
names were replaced by empty strings before that. The snapshot form
of tests/jerry/arguments.js fails because of this issue.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
When merging PRs via the GitHub web interface, CR characters can
sporadically appear in the commit message. This can also cause
signed-off-by message mismatch in check-signed-off.sh (even if
everything else is OK). To be on the safe side, this patch removes
any CR characters from the output of git show when performing the
check.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Separate the utf-8 and ascii strings.
In case of ascii strings the size is equal to the length, so we able to store this information
in the string descriptor instead of using the string header to store it.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
Fixed the return value to return false when the field does
not exist as the documentation says.
Related issue: #1041
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Added errol implementation. Fixed '3d-raytrace.js', because
the new algorithm has better precision and also reduce the
code size.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Merged the mbed releated targets into one source.
Available targets: FRDM-K64f, Discovery-STM32F4, Discovery-STM32F429ZI, NUCLEO-STM32F4
JerryScript-DCO-1.0-Signed-off-by: Imre Kiss kissi@inf.u-szeged.hu
Those internal properties which have a primitive value field or where the property value type
is an ecma_object_t ptr were checked earlier.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
This change affects only those internal properties which have a primitive value field.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
Recent changes eliminate the need for `jerry_port_putchar`. As port
API discussions don't make it likely that it will ever be needed
again, this patch removes its declaration from jerry-port.h and its
implementations from the port(s).
The related code in jerry-libc is not needed either: whatever `putc`
(and `puts`) can do, `printf` can do as well.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The internals have surprisingly large number of unused functions at
surprising places. This patch cleans them out to make maintenance
easier and to prevent dead code having effect on future decisions.
The patch intentionally does not try to clean up public API but
focuses on internal modules only that are/should not be reachable
from "outside".
However, unit tests do access private API, thus tests of literal
storage had to be adjusted.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
This changes affects those internal properties where the property value type is an ecma_object_t ptr.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
Replaced `gettimeofday`-related code with `jerry_port_get_current_time`
and `jerry_port_get_time_zone` function calls. Moved old code to
default port implementation.
Removed `ENABLE_DATE_SYS_CALLS` as date syscalls should "just work".
Fix DST adjustments: even if `gettimeofday` returns meaningful data in
`tz_dsttime`, the value is just a flag (or, according to some sources,
a tri-state value: >0 if DST applies, ==0 if DST does not apply, <0 if
unknown). Hitherto, the field was simply added to/subtracted from a
time value in milliseconds. To use it approximately correctly, the
field's value should be multiplied by "millisecs/hour".
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
* Moved the error codes to jerry-port.h and declared port function
`jerry_port_fatal`.
* Moved "exit or abort on fail" functionality to the newly added
jerry-port-default-fatal.c.
* This implied that a default port-specific API had to be introduced:
functions `jerry_port_default_set_abort_on_fail` and
`jerry_port_default_is_abort_on_fail` declared in jerry-port-default.h
control the fatal exit behaviour.
* For the sake of clarity, renamed jerry-port.c to
jerry-port-default-io.c.
* Adapted CMakeLists to deal with port implementations consisting of
more then one source file and exposing headers. This also required
the renaming of `EXTERNAL_PORT_FILE` cmake option to
`EXTERNAL_PORT_DIR`.
* Adapted main sources to use the default port header for the
abort-on-fail functionality, as that is not part of the core jerry
API anymore.
* Added default port implementation to the static source code checker
tools.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
* LICENSE needed year update.
* The asm component of the posix target of jerry-libc had no
copyright & license notice since it has been introduced in 2015.
Traced back history and added missing header with correct years.
* Three tests in jerry/fail/1 also missed header. Added.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Apps that use jerry should not (must not!) include and rely on its
internal headers. Typical issue is the use of "jrt/jrt.h". Fixing
`main-{unix,mcu}.c`, and speculatively the apps under the `targets`
directory as well.
(Note: a fix can be either including "jerry-port.h" and using
functions declared there, e.g., `jerry_port_errormsg`, or simply
using standard libc function like `printf`. Both approaches occur
in this patch.)
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The two target implementations are very close clones of each other.
The only known differences are the following:
* The asm component of the linux target has `.type` and `.size`
declarations for the functions defined therein, while the darwin
target doesn't support those.
* Linux uses `__NR_xxx` mnemonics for syscall numbers, while darwin
uses `SYS_xxx` format.
* Darwin does not have `exit_group` syscall but `exit` only.
* The linux target has a commented out `jrt_set_mem_limits` fuction
declaration at the end of the C source. (Based on its name, this
function does not really belong here.)
Simple preprocessor macros can unify the first three differences.
While for the sake of legacy, we can keep the fourth commented-out
code in the code base; it might turn out to be useful elsewhere in
the future. Since it remains commented out it wont cause any
problems on any OSs.
So, this patch gets rid of a lot of duplication.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Introducing the `assert.h` public header with the `assert(x)` macro
and already making use of it in jerry-libc sources. These newly
introduced ISO C-conforming features replace the non-conforming
`LIBC_ASSERT` and `LIBC_NDEBUG` at no cost, and they also have the
benefit that we can expose `assert` in a public header and make it
useful to jerry-libc users.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Improvements related to lexer:
* duplicated clone elimination
* magic numbers are replaced with constants
* functions are moved form util to lit-char-helpers
JerryScript-DCO-1.0-Signed-off-by: István Kádár ikadar@inf.u-szeged.hu
itself seems a step back, but the primary aim is opening future
optimization opportunities. The list of changes follows:
- Property is changed to be an abstract type, which has type, flags,
and a value. It does not have a name anymore and property pointers
cannot be compressed.
- Full (32 bit) ecma values can be property values. This allows
using non-compressed pointers for ecma values in the future.
- The property chain is not restricted to the same item anymore,
it can contain hash maps, arrays in the future.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Fixed doc comments issues:
* Fixed mistyped param doc comments (`/**<` is OK, `/** <` is not).
* Put special characters (e.g., pipe, backslash, etc.) in quotes, as they can
confuse doxygen and it will print lots of various warnings. For the sake of
completeness and consistent style, also quote some special characters in
re-bytecode.h
* Added missing `@{`s, removed extra `@}`s.
* Turned `/*` comments to `/**<` doc comments.
Ensured same style for doc groups everywhere:
* Where `\addtogroup`, `@{`, and `@}` doxygen commands are used, the order to be
followed is: license, `#ifndef` guards (in headers), includes, `\addtogroup`
and `@{`, main code content, `@}`, `#endif` guards (in headers).
* Multiple `\addtogroup`s or multiple `@}`s should be in the same doc comment.
* First `\addtogroup` should be on the very first line of a doc comment, i.e.,
`/** \addtogroup`.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The core functionality (i.e., the equivalent of `kill (getpid (), sig);`)
was already there in the implementation of `abort ()`. Now, it got
factored out to `raise ()` so that others (most importantly,
`__aeabi_ldiv0`) can call and link to it as well.
Also, removed `LIBC_UNREACHABLE_STUB_FOR` macro, as it is not used anymore.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The MCU-targets depend on some platform-related resources.
When these files are missing the build cannot be performed.
JerryScript-DCO-1.0-Signed-off-by: Zsolt Borbély zsborbely.u-szeged@partner.samsung.com
Benefits:
* Better readability and maintenance
* Better heap consumption on 'date-format-xparb.js' test of SunSpider
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
After recent changes to jerry-libc, `syscall_N` C functions became
pure trampolines to their appropriate `syscall_N_asm` counterparts
written in assembly. Removing the C functions and renaming the
assembly functions to take their place simplifies the code.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
