There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* Renamed all CONFIG_DISABLE_<name>_BUILTIN macro to JERRY_BUILTIN_<name> format.
* The special JERRY_BUILTINS macro specifies the basic config for all es5.1 builtins.
* Renamed all CONFIG_DISABLE_ES2015_<name> to JERRY_ES2015_<name> format.
* The special JERRY_ES2015 macro specifies the basic config for all es2015 builtins.
* Renamed UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
* All options (in this change) can have a value of 0 or 1.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
JERRY_REGEXP_STRICT_MODE is set to 0 by default.
* Reworked CONFIG_ECMA_NUMBER_TYPE macro to JERRY_NUMBER_TYPE_FLOAT64 name and now
it uses the value 1 for 64 bit floating point numbers and 0 for 32 bit floating point
number.
By default the 64-bit floating point number mode is enabled.
* All new JERRY_ defines can be used wit the `#if ENABLED (JERRY_...)` construct to
test if the feature is enabled or not.
* Added/replaced a few config.h includes to correctly propagate the macro values.
* Added sanity checks for each macro to avoid incorrectly set values.
* Updated profile documentation.
* The CMake feature names are not updated at this point.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
* Rewritten 128-bit integer "type" to use two 64-bit ints (they are
enough), and made it a proper struct instead of an array.
* Rewritten all single-bit shift loops to multi-bit shifts with the
help of CLZ, and used `__builtin_clzll` where available.
* Simplified (and documented) 128-bit DIV10 operation.
* Renamed 128-bit integer handling macros to use simpler names.
(And removed unused macros that were laying around.)
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
A lot of warnings remained hibben because 'EXTRACT_ALL' was previously set to YES.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The affected function calls have been replaced with the appropriate arithmetic operands.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch fixes this bug which caused corrupted stack by preventing unnecessary double to ascii conversion even if
the convertible number of digits is higher than allowed.
In addition, improved ecma_double_to_binary_floating_point function by removing a needless buffer.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch extends the infinity and zero parsing of the convertible number by checking the normalized number exponent part.
This improvement prevents the engine's hanging while converting extreme big numbers.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Fixes#1367.
From now numbers are represented as binary floating-point which guarantees the expected operation of toFixed function.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
For example Number(".") and Number("e5") should be NaN not
zero. Parsing Number("e") caused buffer overflow as well.
Infinity parsing is a bit faster now.
Fixes#1636.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
There is no need for putting `LIT_CHAR_*` constants in const
scalars or arrays, they can be used directly. (There is especially
no need for arrays of 10 elements if only 2 of them are used.)
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
* Make constants static in `ecma_number_to_utf8_string`.
* Make `ecma_number_to_utf8_string` use early returns, and rewrite
its self-recursion in case of negative numbers.
* Make the stringification of decimal exponent in
`ecma_number_to_utf8_string` use `ecma_uint32_to_utf8_string`.
* Changed ERROL0 dtoa implementation to use the `double` type
instead of `ecma_number_t`. Thus, even is `ecma_number_t` is 32
bit wide, the algorithm works the same.
* Changed `ecma_number_to_decimal` to use the ERROL0 dtoa algorithm
for 32-bit floats as well.
* Changed `ecma_number_to_decimal` to generate the decimal string
representation of the mantissa instead of an `uint64_t` number.
* Changed `ecma_number_to_utf8_string` to make use of the already
available string representation of the mantissa, generated now by
`ecma_number_to_decimal`.
* Changed `ecma_number_to_utf8_string` not to use static arrays and
variables for digit, "e", etc. generation.
* Changed all `Number.prototype.toXXX` implementations and the
`ecma_builtin_number_prototype_helper_round` helper to make use
of the already available string representation of the mantissa,
generated now by `ecma_number_to_decimal`.
* Factored out the common stringification parts of all
`Number.prototype.toXXX` implementations into a new helper
`ecma_builtin_number_prototype_helper_to_string`.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
This modificiation affects those conditions which check that
a value can be represented with a smaller type.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
Added errol implementation. Fixed '3d-raytrace.js', because
the new algorithm has better precision and also reduce the
code size.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Fixed doc comments issues:
* Fixed mistyped param doc comments (`/**<` is OK, `/** <` is not).
* Put special characters (e.g., pipe, backslash, etc.) in quotes, as they can
confuse doxygen and it will print lots of various warnings. For the sake of
completeness and consistent style, also quote some special characters in
re-bytecode.h
* Added missing `@{`s, removed extra `@}`s.
* Turned `/*` comments to `/**<` doc comments.
Ensured same style for doc groups everywhere:
* Where `\addtogroup`, `@{`, and `@}` doxygen commands are used, the order to be
followed is: license, `#ifndef` guards (in headers), includes, `\addtogroup`
and `@{`, main code content, `@}`, `#endif` guards (in headers).
* Multiple `\addtogroup`s or multiple `@}`s should be in the same doc comment.
* First `\addtogroup` should be on the very first line of a doc comment, i.e.,
`/** \addtogroup`.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Those macros are legacy and are not used consitently throughout the
code base. This patch eliminates their definitions and rewrites
their remaining occurrences to TODO comments.
All occurrences have been checked and made sure that the comments
used a consistent style.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
* inline some hot function
* add 'ecma_copy_value_if_not_object' similer to 'ecma_value_free_if_not_object'
* remove unnecessary helpers
* improve 'do_number_bitwise_logic'
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
E.g.,
* `ssize_t` was used where `lit_utf8_size_t` or `jerry_api_size_t`
would have been correct,
* `lit_utf8_size_t` was used where `ecma_length_t` would have been
correct.
Note, the patch also includes internal and public API changes:
* `ecma_string_to_utf8_string` does not return negative value if
output buffer is not large enough to contain the string; the
buffer is expected to be large enough. (`ecma_string_get_size`
can be used to retrieve the required size.)
* `jerry_api_string_to_char_buffer` adapts the same logic (and
`jerry_api_get_string_size` can be used to determine the
required size of the buffer).
Related issue: #942
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Modifications:
* eliminate unnecessary variables, functions
* use ECMA_NUMBER macros where it is possible
* simplify code
* minor style fix (comments, increase-decrease operators)
JerryScript-DCO-1.0-Signed-off-by: Zsolt Borbély zsborbely.u-szeged@partner.samsung.com
