The removal of these macros enabled cppcheck to reveal new errors.
These errors are also fixed by the patch.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This change includes several bugfixes, general improvements, and support
for additional features.
- Added full support for web compatibility syntax defined in Annex B
- Implemented parsing and matching patterns in unicode mode
- Fixed capture results when iterating with nested capturing groups
- Significantly reduced regexp bytecode size
- Reduced stack usage during regexp execution
- Improved matching performance
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
A large rework because surrogate pairs must be combined.
Currently only the 0x10C80..0x10CF2 is accepted as valid identifier character from the non-basic plane.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch unifies the recursion limit checking for RegExp, function call and JSON as well.
Until now the limit was only a counter which was increased/decreased at certain points.
This counter has been substituted with a numeric limit which allows to restrict the stack usage.
This patch fixes#2963 and resolves the closed#2258 issue.
Co-authored-by: Gabor Loki loki@inf.u-szeged.hu
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* The following macros are now 0/1 switches:
** Renamed CONFIG_ECMA_LCACHE_DISABLE to JERRY_LCACHE.
** Renamed CONFIG_ECMA_PROPERTY_HASHMAP_DISABLE to JERRY_PROPERTY_HASHMAP.
** Renamed CONFIG_DISABLE_UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
** Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
** Renamed JERRY_DISABLE_JS_PARSER to JERRY_PARSER.
** Renamed JERRY_ENABLE_ERROR_MESSAGES to JERRY_ERROR_MESSAGES.
** Renamed JERRY_ENABLE_EXTERNAL_CONTEXT to JERRY_EXTERNAL_CONTEXT.
** Renamed JERRY_ENABLE_LINE_INFO to JERRY_LINE_INFO.
** Renamed JERRY_ENABLE_LOGGING to JERRY_LOGGING.
** Renamed JERRY_ENABLE_SNAPSHOT_EXEC to JERRY_SNAPSHOT_EXEC.
** Renamed JERRY_ENABLE_SNAPSHOT_SAVE to JERRY_SNAPSHOT_SAVE.
** Renamed JERRY_SYSTEM_ALLOCATOR to JERRY_SYSTEM_ALLOCATOR.
** Renamed JERRY_VM_EXEC_STOP to JERRY_VM_EXEC_STOP.
** Renamed JMEM_GC_BEFORE_EACH_ALLOC to JERRY_MEM_GC_BEFORE_EACH_ALLOC.
** Renamed JMEM_STATS to JERRY_MEM_STATS.
** Renamed PARSER_DUMP_BYTE_CODE to JERRY_PARSER_DUMP_BYTE_CODE.
** Renamed REGEXP_DUMP_BYTE_CODE to JERRY_REGEXP_DUMP_BYTE_CODE.
* Recursion check changes:
** Renamed REGEXP_RECURSION_LIMIT to JERRY_REGEXP_RECURSION_LIMIT.
** Renamed VM_RECURSION_LIMIT to JERRY_VM_RECURSION_LIMIT.
* Attribute macro changes:
** Renamed JERRY_CONST_DATA to JERRY_ATTR_CONST_DATA.
** Renamed JERRY_HEAP_SECTION_ATTR to JERRY_ATTR_GLOBAL_HEAP.
Now the macro can specify any attribute for the global heap object.
* Other macro changes:
** Renamed CONFIG_MEM_HEAP_AREA_SIZE to JERRY_GLOBAL_HEAP_SIZE.
Then new macro now specify the global heap size in kilobytes.
* Updated documentations to reflect the new macro names.
For more deatils please see jerry-core/config.h.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* Renamed all CONFIG_DISABLE_<name>_BUILTIN macro to JERRY_BUILTIN_<name> format.
* The special JERRY_BUILTINS macro specifies the basic config for all es5.1 builtins.
* Renamed all CONFIG_DISABLE_ES2015_<name> to JERRY_ES2015_<name> format.
* The special JERRY_ES2015 macro specifies the basic config for all es2015 builtins.
* Renamed UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
* All options (in this change) can have a value of 0 or 1.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
JERRY_REGEXP_STRICT_MODE is set to 0 by default.
* Reworked CONFIG_ECMA_NUMBER_TYPE macro to JERRY_NUMBER_TYPE_FLOAT64 name and now
it uses the value 1 for 64 bit floating point numbers and 0 for 32 bit floating point
number.
By default the 64-bit floating point number mode is enabled.
* All new JERRY_ defines can be used wit the `#if ENABLED (JERRY_...)` construct to
test if the feature is enabled or not.
* Added/replaced a few config.h includes to correctly propagate the macro values.
* Added sanity checks for each macro to avoid incorrectly set values.
* Updated profile documentation.
* The CMake feature names are not updated at this point.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
The regexp engine does not have any recursion depth check, thus it can cause problems with various regexps. Added a new build option `--regexp-recursion-limit N` whose
default value is 0, which is for unlimited recursion depth. Also added a build-option-test.
Fixes#2448Fixes#2190
JerryScript-DCO-1.0-Signed-off-by: Istvan Miklos imiklos2@inf.u-szeged.hu
Assertion 'qmin <= qmax' failed in 're_insert_into_group', but
it should throw a SyntaxError. Fixes#2384.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
By removing the ECMA_TRY_CATCH macros at these
places ~200 bytes of .text is saved on rpi2.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Function definitions with no parameters should always use the void keyword to allow the compiler to catch invalid calls of those functions at compile time.
Enable -Wold-style-definition to catch this early in the future.
Fixes#1649.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
* Introduced new 'jmem.h' for public part.
* Removed obsolete headers
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
This patch:
* Ensures that all calls to `jerry_port_log` in jerry-core happen
via macros defined in jrt.h. Also, it unifies the names of those
macros: as `JERRY_ERROR_MSG` and `JERRY_WARNING_MSG` gave a good
pattern that was well aligned with the naming scheme of the log
level enum, `JERRY_DLOG` and `JERRY_DDLOG` were rewritten to
`JERRY_DEBUG_MSG` and `JERRY_TRACE_MSG`.
* Ensures that all debug logging code parts of jerry-core (i.e.,
memory statistics, JS byte-code dumps, and RegExp byte-code
dumps) are guarded by macros: `JMEM_STATS`,
`PARSER_DUMP_BYTE_CODE`, and `REGEXP_DUMP_BYTE_CODE`, which in
turn are controled by cmake build system feature flags
`FEATURE_MEM_STATS`, `FEATURE_PARSER_DUMP`, and
`FEATURE_REGEXP_DUMP`.
* Ensures that all debug logging functionalities can be controled
during run time (provided that they were enabled during build
time): the engine has `JERRY_INIT_MEM_STATS[_SEPARATE]`,
`JERRY_INIT_SHOW_OPCODES`, `JERRY_INIT_SHOW_REGEXP_OPCODES` init
flags, and the default unix/linux command line app has
corresponding command line switches.`
* Drops `FEATURE_LOG`, `JERRY_ENABLE_LOG`, and
`JERRY_INIT_ENABLE_LOG`, as their name was misleadingly general,
even though they mostly controled the regexp engine only. The
above-mentioned `*REGEXP*` things mostly act as their
replacements.
* Updates build, test, and measurement tool scripts, and
documentation.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The standard doesn't defines ECMAScript Compact Profile as a subset of Ecma-262 Edition 5.1.
Profile modes can be added easily like the minimal profile if required.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
Zero out all globals (and remove unnecessary init() functions).
Move snapshot globals to a temporary stack variable.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Changed 'ecma_copy_or_ref_ecma_string' to 'ecma_ref_ecma_string'. It does
not copy the string if the maximum number of reference counter is reached,
but bails out with an error like the 'ecma_ref_object' function does.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
The 'mem_' prefix is too general, so it might clash with
symbols in other libraries. Renamed the directory, file,
funtion and type names.
Related issue: #1052
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Benefits:
* Better readability and maintenance
* Better heap consumption on 'date-format-xparb.js' test of SunSpider
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Those macros are legacy and are not used consitently throughout the
code base. This patch eliminates their definitions and rewrites
their remaining occurrences to TODO comments.
All occurrences have been checked and made sure that the comments
used a consistent style.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
memory consumption, because the new allocator uses less memory if
the size as available when a block is freed. Snapshot generation
is also simplified.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Added eviction mechanism to RegExp cache and small
refactoring. Fixed a bug when logging is enabled.
Related issue: #927
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Use empty string for message property of builtin error objects
by default. Add ERROR_MESSAGES build option.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Passing argument 1 of ‘strncmp’ from incompatible pointer type.
Assignments from incompatible pointer types.
Passing argument or initialization discards ‘const’ qualifier from pointer target type.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
E.g.,
* `ssize_t` was used where `lit_utf8_size_t` or `jerry_api_size_t`
would have been correct,
* `lit_utf8_size_t` was used where `ecma_length_t` would have been
correct.
Note, the patch also includes internal and public API changes:
* `ecma_string_to_utf8_string` does not return negative value if
output buffer is not large enough to contain the string; the
buffer is expected to be large enough. (`ecma_string_get_size`
can be used to retrieve the required size.)
* `jerry_api_string_to_char_buffer` adapts the same logic (and
`jerry_api_get_string_size` can be used to determine the
required size of the buffer).
Related issue: #942
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Move RegExp bytecode functions to a separate file.
Optimize bytecode lenght on character matching.
Implement a basic RegExp cache to optimize memory
usage on duplicated RegExp in JS files. Also fix
minor style issues and add missing comments. Improve
existing comments.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Remove ecma_completion_value_t, and add an extra bit to
ecma_value_t to represent errors. From the long list of
completion types only normal and error remained.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
* Fix "end of file while inside a group" doxygen warnings.
* Fix "unknown command" doxygen warnings caused by incorrect
argument references. Instead of `@foo`, `@a foo` is the proper
format.
* Fix "unknown command" doxygen warnings caused by incorrect
parameter direction specifications. Instead of `@in`, `@out`,
and `@in-out`, `[in]`, `[out]`, and `[in,out]` are the proper
formats.
* Wrapping special characters in quotes to avoid doxygen
confusion. Raw pipe, semicolon, dot, backslash, etc. characters
can drive doxygen into various misinterpretations and warnings.
E.g.:
```
End of list marker found without any preceding list items
Found unknown command
```
Putting quotes around such text snipets eliminates the errors.
* Fix the documentation of `ecma_builtin_global_object_print`. Raw
<> and \ sequences confused doxygen in various ways (it tried to
interpret them as XML tags and doxygen commands).
* Fix "ignoring title that does not match old title" doxygen
warnings. At some places, the group titles were out of sync, at
others, the group names were incorrect.
* Fix "parameters are not documented" doxygen warnings. Fixing
various typos in the inline parameter documentations (`/*`,
`/**`, `/** <`, and `/**>` are all considered incorrect, the
right format is `/**<`).
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
