* drop empty lines when diffing output
* replace expected css with optimized lightningcss output
Lightning CSS generates a more optimal CSS output.
Right now the tests are setup in a way that both the generated css and
expected css are run through `lightningcss` to make sure that the output
is concistent for the `stable` and `oxide` engines. But this also means
that the expected output _could_ be larger (aka not optimized) and still
matches (after it runs through lightningcss).
By replacing this with the more optimal output we achieve a few things:
1. This better reflects reality since we will be using `lightningcss`.
2. This gets rid of unnecessary css.
3. Removed code!
* Run test suite against both engines
* make eslint happy
* only run `stable` tests on Node 12
* use normal expectation instead of snapshot file
When we run the tests only against `stable` (for node 12), then the
snapshots exists for the `Oxide` build. They are marked as `obsolete`
and will cause the `npm run test` script to fail. Sadly.
Inlined them for now, but ideally we make those tests more blackbox-y so
that we test that we get source maps and that we can map the sourcemap
back to the input files (without looking at the actual annotations).
* properly indent inline css
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* ensure we use `npm@7` for older versions of Node.js
This is important so that we can guarantee that `workspaces` are
supported which we depend on right now (just for install purposes).
* tmp: trigger CI build (GitHub is doing funky things and not working right now)
* drop Node.js 12 from Node.js CI workflow
* focus on Node.js 16 for now
* Revert "tmp: trigger CI build (GitHub is doing funky things and not working right now)"
This reverts commit a3deed472da498f8a52404b2e8ccbc16f0e93101.
* WIP
* Add support for logical properties in inline direction
* Add scroll-margin/scroll-padding utilities
* Update CHANGELOG
* Rename inset-s/e to start/end
* Update sort order in test
* Use logical properties for space/divide in Oxide
* run non-oxide and OXIDE tests
+ fix oxide version tests
* drop oxide specific test job
The normal `npm run test` will already include the non-oxide and oxide
version when running tests.
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* temporarily disable workflows
* add oxide
Our Rust related parts
* use oxide
- Setup the codebase to be able to use the Rust parts based on an
environment variable: `OXIDE=1`.
- Setup some tests that run both the non-Rust and Rust version in the
same test.
- Sort the candidates in a consistent way, to guarantee the order for
now (especially in tests).
- Reflect sorting related changes in tests.
- Ensure tests run in both the Rust and non-Rust version. (Some tests
are explicitly skipped when using the Rust version since we haven't
implemented those features yet. These include: custom prefix,
transformers and extractors).
- `jest`
-`OXIDE=1 jest`
* remove into_par_iter where it doesn't make sense
* cargo fmt
* wip
* enable tracing based on `DEBUG` env
* improve CI for the Oxide build
* sort test output
This happened because the sorting happens in this branch, but changes
happened on the `master` branch.
* add failing tests
I noticed that some of the tests were failing, and while looking at
them, it happened because the tests were structured like this:
```html
<div
class="
backdrop-filter
backdrop-filter-none
backdrop-blur-lg
backdrop-brightness-50
backdrop-contrast-0
backdrop-grayscale
backdrop-hue-rotate-90
backdrop-invert
backdrop-opacity-75
backdrop-saturate-150
backdrop-sepia
"
></div>
```
This means that the class names themselves eventually end up like this: `backdrop-filter-none\n`
-> (Notice the `\n`)
/cc @thecrypticace
* fix range to include `\n`
* Include only unique values for tests
Really, what we care about most is that the list contains every expected candidate. Not necessarily how many times it shows up because while many candidates will show up A LOT in a source text we’ll unique them before passing them back to anything that needs them
* Fix failing tests
* Don’t match empty arbitrary values
* skip tests in oxide mode regarding custom separators in arbitrary variants
* re-enable workflows
* use `@tailwindcss/oxide` dependency
* publish `tailwindcss@oxide`
* drop prepublishOnly
I don't think we actually need this anymore (or even want because this
is trying to do things in CI that we don't want to happen. Aka, build
the Oxide Rust code, it is already a dependency).
* WIP
* Defer to existing CLI for Oxide
* Include new compiled typescript stuff when publishing
* Move TS to ./src/oxide
* Update scripts
* Clean up tests for TS
* copy `cli` to `oxide/cli`
* make CLI files TypeScript files
* drop --postcss flag
* setup lightningcss
* Remove autoprefixer and cssnano from oxide CLI
* cleanup Rust code a little bit
- Drop commented out code
- Drop 500 fixture templates
* sort test output
* re-add `prepublishOnly` script
* bump SWC dependencies in package-lock.json
* pin `@swc` dependencies
* ensure to install and build oxide
* update all GitHub Workflows to reflect Oxide required changes
* sort `content-resolution` integration tests
* add `Release Insiders — Oxide`
* setup turbo repo + remote caching
* use `npx` to invoke `turbo`
* setup unique/proper package names for integration tests
* add missing `isomorphic-fetch` dependency
* setup integration tests to use `turborepo`
* scope tailwind tasks to root workspace
* re-enable `node_modules` cache for integration tests
* re-enable `node_modules` cache for main CI workflow
* split cache for `main` and `oxide` node_modules
* fix indent
* split install dependencies so that they can be cached individually
* improve GitHub actions caching
* use correct path for oxide node_modules (crates/node)
* ensure that `cargo install` always succeeds
cargo install X, on CI will fail if it already exists.
* figure out integration tests with turbo
* tmp: use `npm` instead of `turbo`
* disable `fail-fast`
This will allow us to run integration tests so that it still caches the
succesful ones.
* YAML OH YAML, Y U WHITESPACE SENSITIVE
* copy the oxide-ci workflow to release-oxide
* make `oxide-ci` a normal CI workflow
Without publishing
* try to cache cargo and node_modules for the oxide build
* configure turbo to run scripts in the root
* explicitly skip failing test for the Oxide version
* run oxide tests in CI
* only use build script for root package
* sync package-lock.json
* do not cache node_modules for each individual integration
* look for hoisted `.bin`
* use turbo for caching build tailwind css in integration tests
* Robin...
* try to use the local binary first
* skip installing integration test dependencies
Should already be installed due to workspace usage
* Robin...
* drop `output.clean`
* explicitly add `mini-css-extract-plugin`
* drop oxide-ci, this is tested by proxy
* ensure oxide build is used in integration tests
This will ensure the `@tailwindcss/oxide` dependency is available
(whether we use it or not).
* setup Oxide shim in insiders release
* add browserslist dependency
* use `install:all` script name
Just using `install` as a script name will be called when running
`npm install`.
Now that we marked the repo as a `workspace`, `npm install` will run
install in all workspaces which is... not ideal.
* tmp: enable insiders release in PRs
Just to check if everything works before merging. Can be removed once
tested.
* don't cache node_modules?
I feel there is some catch 22 going on here.
We require `npm install` to build the `oxide/crates/node` version.
But we also require `oxide/crates/node` for the `npm install` becaus of
the dependency: `"@tailwindcss/oxide": "file:oxide/creates/node"`
* try to use `oxide/crates/node` as part of the workspace
* let's think about this
Let's try and cache the `node_modules` and share as much as possible.
However, some scripts still need to be installed specific to the OS.
Running `npm install` locally doesn't throw away your `node_modules`,
so if we just cache `node_modules` but also run `npm install` that
should keep as much as possible and still improve install times since
`node_modules` is already there.
I think.
* ensure generated `index.js` and `index.d.ts` files are considered outputs
* use `npx napi` instead of `napi` directly
* include all `package-lock.json` files
* normalize caching further in all workflows
* drop nested `package-lock.json` files
* `npm uninstall mini-css-extract-plugin && npm install mini-css-extract-plugin --save-dev`
* bump webpack-5 integration tests dependencies
* only release insiders on `master` branch
* tmp: let's figure out release insiders oxide
* fix little typo
* use Node 18 for Oxide Insiders
* syncup package-lock.json
* let's try node 16
Node 18 currently fails on `Build x86_64-unknown-linux-gnu (OXIDE)`
Workflow.
Install Node.JS output:
```
Environment details
Warning: /__t/node/18.13.0/x64/bin/node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /__t/node/18.13.0/x64/bin/node)
Warning: node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by node)
node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by node)
```
* bump some Node versions
* only release oxide insiders on `master` branch
* don't cache `npm`
* bump napi-rs
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* Fix off-by-one error in variant sort mapping
This didn’t actually have any negative effect because of how it was implemented. But it only happened to work right :D
* Make arbitrary variant sorting deterministic
* Update changelog
* Use faster byte-order comparison
We really only care that the order is _always_ the same. localeCompare is still locale dependent based on environment. This ensures it’s dependent on content only.
* Fix CS
* Don’t reorder webkit scrollbar pseudo elements
In reality, we need to stop reordering pseudo elements completely as `::before:hover` and `::after:hover` are 100% valid and should work per the CSS selector spec even though no browser currently supports it.
* Update changelog
* Fix issue with returning postcss nodes in addVariant
It’s not a supported use case but it didn’t use to break so let’s just fail silently
* Update changelog
* Only apply hover styles when supported (future)
Co-Authored-By: Andrew Brown <browner12@gmail.com>
* update changelog
Co-authored-by: Andrew Brown <browner12@gmail.com>
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* WIP
Still need to write error message
* Update error message
first pass at something better
* Detect invalid variant formats returned by functions
* Add proper error message
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* Add failing test cases
* Flatten finalizeSelector code
* Use AST operations to format selector classes
With this change we only parse the selector once and operate on the AST until we need to turn it back into a selector. In addition this lets us solve an issue where .replace(…) did the wrong thing because it doesn’t understand that .base and .base-foo are two different classes
* Remove extraneous, non-matching selectors from utilities
* Update changelog
* only generate variants for non-user layers
If you have the following css:
```css
@tailwind utilities;
.foo {
color: red;
}
```
And you HTML looks like this:
```html
<div class="hover:foo"></div>
```
Then the output should _not_ generate a `.hover\:foo {}` class.
* ensure that you can apply user csss (without variants)
* update changelog
* remove unused `withRule`
* ensure all ::before and ::after elements have content
* update --tw-content for the content plugin
* simplify `before` and `after` variants
* update tests, to reflect changes
* make new `format` and `wrap` API's private for now
* allow returning a format string from `addVariant` callback
* add `content: var(--tw-content)` for before/after variants
* update tests to add `content: var(--tw-content)`
* update changelog
* use String.raw for css escapes
This will allow us to write code like:
```css
.mobile\:font-bold {}
```
Instead of
```css
.mobile\\:font-bold {}
```
Which resembles "real" css way better in our tests.
* use String.raw in integration tests as well
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
* fix incorrect logic for validating content paths
* remove `includeRules` helper
* generate keyframes as part of the animate plugin
* add matchUtilities
* splitup `variantPlugins` and `corePlugins`
* Replace `culori` with simple color parser
* Use space-separated color syntax
* Update default color values to use space-separated syntax
* Update separator regex
* Fix tests
* add tests for the new `color` util
Also slightly modified the `color` util itself to take `transparent`
into account and also format every value as a string for consistency.
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* move `./tests/jit` to `./tests`
* make tests consistent
Abstracted a `run` function and some syntax highlighting helpers for
`html`, `css` and `javascript`.
