mirror of
https://github.com/jerryscript-project/jerryscript.git
synced 2025-12-15 16:29:21 +00:00
43ea53b1d7
The components are build independently and then are linked with main module corresponding to target platform. Core is supposed to be platform-independent, while libc and plugins are dependent on specific architecture / platform. The commit disables unit tests building and running during precommit. That is supposed to be fixed in a subsequent commit. Also, the commit disables building and running valgrind targets during precommit. Build is supposed to be turned on by an option that should be introduced later. Valgrind-checked runs are supposed to be performed in asynchronous mode.
191 lines
7.8 KiB
Makefile
191 lines
7.8 KiB
Makefile
# Copyright 2014-2015 Samsung Electronics Co., Ltd.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
|
|
#
|
|
# Target naming scheme
|
|
#
|
|
# Main targets: {debug,release}.{linux,stm32f{4}}[.{check,flash}]
|
|
#
|
|
# Target mode part (before dot):
|
|
# debug: - JERRY_NDEBUG; - optimizations; + debug symbols; + -Werror | debug build
|
|
# release: + JERRY_NDEBUG; + optimizations; - debug symbols; + -Werror | release build
|
|
#
|
|
# Target system and modifiers part (after first dot):
|
|
# linux - target system is linux
|
|
# stm32f{4} - target is STM32F{4} board
|
|
#
|
|
# Modifiers can be added after '-' sign.
|
|
# For list of modifiers for PC target - see TARGET_PC_MODS, for MCU target - TARGET_MCU_MODS.
|
|
#
|
|
# Target action part (optional, after second dot):
|
|
# check - run cppcheck on src folder, unit and other tests
|
|
# flash - flash specified mcu target binary
|
|
#
|
|
#
|
|
# Unit test target: unittests_run
|
|
#
|
|
|
|
export TARGET_DEBUG_MODES = debug
|
|
export TARGET_RELEASE_MODES = release
|
|
export TARGET_PC_SYSTEMS = linux
|
|
|
|
export TARGET_PC_MODS = cp cp_minimal mem_stats
|
|
|
|
export TARGET_MCU_MODS = cp cp_minimal
|
|
|
|
export TARGET_PC_SYSTEMS_MODS = $(TARGET_PC_SYSTEMS) \
|
|
$(foreach __MOD,$(TARGET_PC_MODS),$(foreach __SYSTEM,$(TARGET_PC_SYSTEMS),$(__SYSTEM)-$(__MOD)))
|
|
export TARGET_STM32F3_MODS = $(foreach __MOD,$(TARGET_MCU_MODS),mcu_stm32f3-$(__MOD))
|
|
export TARGET_STM32F4_MODS = $(foreach __MOD,$(TARGET_MCU_MODS),mcu_stm32f4-$(__MOD))
|
|
|
|
# Target list
|
|
export JERRY_LINUX_TARGETS = $(foreach __MODE,$(TARGET_DEBUG_MODES),$(foreach __SYSTEM,$(TARGET_PC_SYSTEMS_MODS),$(__MODE).$(__SYSTEM))) \
|
|
$(foreach __MODE,$(TARGET_RELEASE_MODES),$(foreach __SYSTEM,$(TARGET_PC_SYSTEMS_MODS),$(__MODE).$(__SYSTEM)))
|
|
|
|
export JERRY_STM32F3_TARGETS = $(foreach __MODE,$(TARGET_RELEASE_MODES),$(foreach __SYSTEM,$(TARGET_STM32F3_MODS),$(__MODE).$(__SYSTEM)))
|
|
|
|
export JERRY_STM32F4_TARGETS = $(foreach __MODE,$(TARGET_DEBUG_MODES),$(foreach __SYSTEM,$(TARGET_STM32F4_MODS),$(__MODE).$(__SYSTEM))) \
|
|
$(foreach __MODE,$(TARGET_RELEASE_MODES),$(foreach __SYSTEM,$(TARGET_STM32F4_MODS),$(__MODE).$(__SYSTEM)))
|
|
|
|
export JERRY_TARGETS = $(JERRY_LINUX_TARGETS) $(JERRY_STM32F3_TARGETS) $(JERRY_STM32F4_TARGETS)
|
|
|
|
export CHECK_TARGETS = $(foreach __TARGET,$(JERRY_LINUX_TARGETS),$(__TARGET).check)
|
|
export FLASH_TARGETS = $(foreach __TARGET,$(JERRY_STM32F3_TARGETS) $(JERRY_STM32F4_TARGETS),$(__TARGET).flash)
|
|
|
|
export OUT_DIR = ./build/bin
|
|
export BUILD_DIR = ./build/obj
|
|
|
|
export SHELL=/bin/bash
|
|
|
|
all: precommit
|
|
|
|
$(BUILD_DIR)/native:
|
|
@ arch=`uname -p`; if [ "$$arch" == "armv7l" ]; then readelf -A /proc/self/exe | grep Tag_ABI_VFP_args && arch=$$arch"-hf" || arch=$$arch"-el"; fi; \
|
|
mkdir -p $(BUILD_DIR)/native && cd $(BUILD_DIR)/native && cmake -DCMAKE_TOOLCHAIN_FILE=build/configs/toolchain_linux_$$arch.cmake ../../.. &>cmake.log
|
|
|
|
$(BUILD_DIR)/stm32f3:
|
|
@ mkdir -p $(BUILD_DIR)/stm32f3 && cd $(BUILD_DIR)/stm32f3 && cmake -DCMAKE_TOOLCHAIN_FILE=build/configs/toolchain_mcu_stm32f3.cmake ../../.. &>cmake.log
|
|
|
|
$(BUILD_DIR)/stm32f4:
|
|
@ mkdir -p $(BUILD_DIR)/stm32f4 && cd $(BUILD_DIR)/stm32f4 && cmake -DCMAKE_TOOLCHAIN_FILE=build/configs/toolchain_mcu_stm32f4.cmake ../../.. &>cmake.log
|
|
|
|
$(JERRY_LINUX_TARGETS): $(BUILD_DIR)/native
|
|
@ mkdir -p $(OUT_DIR)/$@
|
|
@ $(MAKE) -C $(BUILD_DIR)/native VERBOSE=1 $@ &>$(OUT_DIR)/$@/make.log
|
|
@ cp $(BUILD_DIR)/native/$@ $(OUT_DIR)/$@/jerry
|
|
|
|
unittests: $(BUILD_DIR)/native
|
|
@ mkdir -p $(OUT_DIR)/$@
|
|
@ $(MAKE) -C $(BUILD_DIR)/native VERBOSE=1 $@ &>$(OUT_DIR)/$@/make.log
|
|
@ cp $(BUILD_DIR)/native/unit_test_* $(OUT_DIR)/$@
|
|
|
|
$(JERRY_STM32F3_TARGETS): $(BUILD_DIR)/stm32f3
|
|
@ mkdir -p $(OUT_DIR)/$@
|
|
@ $(MAKE) -C $(BUILD_DIR)/stm32f3 VERBOSE=1 $@.bin &>$(OUT_DIR)/$@/make.log
|
|
@ cp $(BUILD_DIR)/stm32f3/$@ $(OUT_DIR)/$@/jerry
|
|
@ cp $(BUILD_DIR)/stm32f3/$@.bin $(OUT_DIR)/$@/jerry.bin
|
|
|
|
$(JERRY_STM32F4_TARGETS): $(BUILD_DIR)/stm32f4
|
|
@ mkdir -p $(OUT_DIR)/$@
|
|
@ $(MAKE) -C $(BUILD_DIR)/stm32f4 VERBOSE=1 $@.bin &>$(OUT_DIR)/$@/make.log
|
|
@ cp $(BUILD_DIR)/stm32f4/$@ $(OUT_DIR)/$@/jerry
|
|
@ cp $(BUILD_DIR)/stm32f4/$@.bin $(OUT_DIR)/$@/jerry.bin
|
|
|
|
build: $(JERRY_TARGETS) # unittests
|
|
|
|
$(FLASH_TARGETS): $(BUILD_DIR)/mcu
|
|
@$(MAKE) -C $(BUILD_DIR)/mcu VERBOSE=1 $@ 1>/dev/null
|
|
|
|
PRECOMMIT_CHECK_TARGETS_NO_VALGRIND_LIST= debug.linux.check \
|
|
release.linux.check
|
|
|
|
PRECOMMIT_CHECK_TARGETS_VALGRIND_LIST= #debug.linux-valgrind.check \
|
|
release.linux-valgrind.check \
|
|
release.linux-cp-valgrind.check
|
|
|
|
push: ./tools/git-scripts/push.sh
|
|
@ ./tools/git-scripts/push.sh
|
|
|
|
pull: ./tools/git-scripts/pull.sh
|
|
@ ./tools/git-scripts/pull.sh
|
|
|
|
log: ./tools/git-scripts/log.sh
|
|
@ ./tools/git-scripts/log.sh
|
|
|
|
precommit: clean
|
|
@ echo -e "\nBuilding...\n\n"
|
|
@ $(MAKE) build
|
|
@ echo -e "\n================ Build completed successfully. Running precommit tests ================\n"
|
|
@ #echo -e "All targets were built successfully. Starting unit tests' run.\n"
|
|
@ #$(MAKE) unittests_run TESTS_OPTS="--silent"
|
|
@ #echo -e "Unit tests completed successfully. Starting parse-only testing.\n"
|
|
@ #echo -e "All targets were built successfully. Starting parse-only testing.\n"
|
|
@ # Parse-only testing
|
|
@ for path in "./tests/jerry" "./tests/benchmarks/jerry"; \
|
|
do \
|
|
run_ids=""; \
|
|
for check_target in $(PRECOMMIT_CHECK_TARGETS_NO_VALGRIND_LIST) $(PRECOMMIT_CHECK_TARGETS_VALGRIND_LIST); \
|
|
do \
|
|
$(MAKE) -s -f Makefile.mk TARGET=$$check_target $$check_target TESTS="$$path" TESTS_OPTS="--parse-only" OUTPUT_TO_LOG=enable & \
|
|
run_ids="$$run_ids $$!"; \
|
|
done; \
|
|
result_ok=1; \
|
|
for run_id in $$run_ids; \
|
|
do \
|
|
wait $$run_id || result_ok=0; \
|
|
done; \
|
|
[ $$result_ok -eq 1 ] || exit 1; \
|
|
done
|
|
@ echo -e "Parse-only testing completed successfully. Starting full tests run.\n"
|
|
@ # Full testing
|
|
@ for path in "./tests/jerry"; \
|
|
do \
|
|
run_ids=""; \
|
|
for check_target in $(PRECOMMIT_CHECK_TARGETS_NO_VALGRIND_LIST) $(PRECOMMIT_CHECK_TARGETS_VALGRIND_LIST); \
|
|
do \
|
|
$(MAKE) -s -f Makefile.mk TARGET=$$check_target $$check_target TESTS="$$path" TESTS_OPTS="" OUTPUT_TO_LOG=enable & \
|
|
run_ids="$$run_ids $$!"; \
|
|
done; \
|
|
result_ok=1; \
|
|
for run_id in $$run_ids; \
|
|
do \
|
|
wait $$run_id || result_ok=0; \
|
|
done; \
|
|
[ $$result_ok -eq 1 ] || exit 1; \
|
|
done
|
|
@ for path in "./tests/jerry-test-suite/precommit_test_list"; \
|
|
do \
|
|
run_ids=""; \
|
|
for check_target in $(PRECOMMIT_CHECK_TARGETS_NO_VALGRIND_LIST); \
|
|
do \
|
|
$(MAKE) -s -f Makefile.mk TARGET=$$check_target $$check_target TESTS="$$path" TESTS_OPTS="" OUTPUT_TO_LOG=enable & \
|
|
run_ids="$$run_ids $$!"; \
|
|
done; \
|
|
result_ok=1; \
|
|
for run_id in $$run_ids; \
|
|
do \
|
|
wait $$run_id || result_ok=0; \
|
|
done; \
|
|
[ $$result_ok -eq 1 ] || exit 1; \
|
|
done
|
|
@ echo -e "Full testing completed successfully\n\n================\n\n"
|
|
|
|
#unittests_run: unittests
|
|
# @$(MAKE) -s -f Makefile.mk TARGET=$@ $@
|
|
|
|
clean:
|
|
@ rm -rf $(BUILD_DIR) $(OUT_DIR)
|
|
|
|
.PHONY: clean build unittests_run
|