`JERRY_UNREACHABLE`s often signal code structure that could be
improved: they can usually either be rewritten to `JERRY_ASSERT`s
or eliminated by restructuring loops, `if`s or `#if`s. Roughly,
the only valid occurences are in default cases of `switch`es. And
even they can often be merged into non-default cases.
Moreover, it is dangerous to write meaningful code after
`JERRY_UNREACHABLE` because it pretends as if there was a way to
recover from an impossible situation.
This patch rewrites/eliminates `JERRY_UNREACHABLE`s where possible
and removes misleading code from after them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
A lot of warnings remained hibben because 'EXTRACT_ALL' was previously set to YES.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Unlike normal snapshots, no part of a static snapshot is loaded into
the RAM when executed from ROM. Static snapshots rely heavily on
external magic strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Aborts are similar to exceptions except they are not caught by catch
and finally blocks. Callbacks should honor aborts as well and return
them without processing them. Aborts are never thrown by JavaScript
code.
In the future certain events such as out-of-memory condition may
also throw aborts.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
'ecma_clear_error_reference' must increase the reference of the returned
ecma value referenced by the error if there are more than one reference.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
This change frees up the error bit in ecma_value_t, which allows
to define 4 more value types (e.g. symbols). To keep API
compatibility we introduce a box for values with error flag.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Without the file renaming there are two jerry-debugger.c files.
Thus when the jerry-core archive is created there are two objects
in it with the same name. Generally this does not create any problems.
However if the archive is extracted then the second object file
will overwrite the first one which results in undefined reference
linkage error.
The jerry- prefix was removed from the file names and
fixed the include oreders where it was needed.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Ecma-object have native handle type inside, and binding code could use
type info to validate native handle's type.
Related issue #1681
JerryScript-DCO-1.0-Signed-off-by: Zidong Jiang zidong.jiang@intel.com
Two issues were fixed as well: inserting breakpoints before non-directive
prologue strings and the receive can process multiple messages.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The debugger supports setting breakpoints, execution control (step, next, continue)
and getting backtrace. The communication is WebSocket-based, so a browser can
communicate with JerryScript without any intermediate application.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
JerryScript-DCO-1.0-Signed-off-by: Levente Orban orbanl@inf.u-szeged.hu
Triggering hashmap recreate during property delete may damage the
property chain list, so recreate postponed after the delete is done.
Next attempt to fix#1533.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Furthermore the maximum number of properties is increased to 96.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
Property names were always required a string reference which consumed
a large amount of memory for arrays. This patch reduces this consumption
by directly storing the value part of certain strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Free a new bit in the property descriptor by combining internal
and special property types into one group. Also simplify checking
special properties since bit-and operation is not needed anymore.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch reduces memory consumption for strings such as "0" or "123"
by 8 bytes and "4294967295" by 16 bytes. The hash computation is changed
for using the lower 16 bits for these strings which is much faster than
converting the value to string first and compute the hash. The trade-of
is a small overhead when strings are created or concatenated.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The new code does not use value collections which reduces the argument array size by half.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Instead of allocating a helper object, argument names are appended right
after the arguments objects. This reduces memory consumption and improve
performance as well. In the future this could be further improved by a
bitfield, but that would require a reference to the byte code which
might increase memory consumption in a few corner cases.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Class and value internal properties are always exists for primitive
types (e.g. Boolean, Regex) so they can be stored right after the
object. This improve property access (since internal properties are
searched by a slow linear algorithm) and reduces memory consumption,
since only 8 byte is allocated for these two properties instead of
16 which is the size of a property pair.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The new set does not allocate memory when the size of the array is reduced.
Furthermore the [[PutObject]] method directly calls the new length setter.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Properties are changed to a type and value pair instead of a pointer to an internal
representation. Functions such as ecma_op_object_get_[own_]property do not
return with property pointers anymore.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Removing a lot of ECMA_PROPERTY_VALUE_PTR macro calls. The only drawback
is free callbacks for native objects cannot be deleted anymore. Redefining
a free callback is a rare case, so this trade-of is acceptable.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The standard doesn't defines ECMAScript Compact Profile as a subset of Ecma-262 Edition 5.1.
Profile modes can be added easily like the minimal profile if required.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
- Bugfix for removing property hashmap in ecma_gc_run.
- Fixed bug in ecma_create_property() caused by the new property pair allocation.
JerryScript-DCO-1.0-Signed-off-by: István Kádár ikadar@inf.u-szeged.hu
The new literal storage keeps ecma strings rather than having a
custom string implementation which duplicates the string management
routines. Conversions between string implementations are eliminated
which improved the performance by 4%.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Several internal properties are removed and directly stored as
part of the object. Faster built-in and JS function processing.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Changed 'ecma_copy_or_ref_ecma_string' to 'ecma_ref_ecma_string'. It does
not copy the string if the maximum number of reference counter is reached,
but bails out with an error like the 'ecma_ref_object' function does.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
The cache stores only real properties now, because storing NULLs has
little benefit according to tests. Since only real properties are
stored now, there is no need to create real references to objects
and property names, which reduces the keeping of dead objects after
garbage collection.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
the three boolean arguments of ecma_create_named_data_property and the
two boolean arguments of ecma_create_named_accessor_property are combined
into one uint8_t argument. On ARM-32 it is preferred to have less than
four arguments, since these arguments can be passed in registers.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The 'mem_' prefix is too general, so it might clash with
symbols in other libraries. Renamed the directory, file,
funtion and type names.
Related issue: #1052
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
String, Boolean) to use ecma-values. When the value of a Number object is
a small integer number, this change reduces the memory consumption, since no
double is allocated.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
