Remove redundancy between all-in-one and all-in-one-source builds
by keeping only the second, and adopt the more established term
"amalgamated" build for it. This change includes the following:
- Replace `ENABLE_ALL_IN_ONE` and `ENABLE_ALL_IN_ONE_SOURCE` cmake
options with `ENABLE_AMALGAM` top-level option.
- Replace `--all-in-one` option of `build.py` helper with
`--amalgam`.
- Merge the `srcmerger.py` and `srcgenerator.py` tool scripts into
`amalgam.py` (with improvements).
- Update documentation.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Normally, it is more usual and safe to use a toolchain's native
math library. Especially, if multiple components of a project use
math functions, in which case all components should be linked
against the same libm.
The libjerry-math can be used, of course, but as it needs extra
care and consideration, it should be opt-in.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
That "libm" in the name of the library resulted in awkward naming
on *nix systems (`libjerry-libm.*`, "lib" occurring twice). And the
name of the corresponding header is `math.h` anyway.
Note that this is a breaking change in some sense. The commit
contains no API change, but the build system does change for users
of the math library.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The minimal variant became quite meaningless lately. There were two
port APIs originally that had extra functions in the default port
in addition to the core-mandated implementations: the I/O and
Termination port APIs. However, the extra Termination API code was
removed a year ago, leaving some minimal extension in the I/O port
only. As the overhead of the extension is negligible, it is not
worth maintaining two library variants.
Therefore
- this commit removes the minimal variant of the default port lib,
- rewrites uses of the minimal variant to use the variant with the
I/O extension, and
- updates targets where I/O port code was copy-n-pasted.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Fixed and updated some of the repository locations and the
relevant build commands.
- Updating `stlink` fixes a CMake build error on the 1.5.1 branch
- Updating the `kconfig` build command allows creating `kconfig-tweak`,
which fixes a warning during the NuttX configuration
JerryScript-DCO-1.0-Signed-off-by: Mátyás Mustoha mmatyas@inf.u-szeged.hu
Update the Travis builds to use NuttX 9.0, which was
released on April 26, 2020.
JerryScript-DCO-1.0-Signed-off-by: Mátyás Mustoha mmatyas@inf.u-szeged.hu
A list of changes:
- 'es2015-subset' profile is deprecated, and an 'es.next' profile is added.
- The default profile is changed to 'es.next'
- Renamed the JERRY_ES2015 guard to JERRY_ESNEXT
- Renamed JERRY_ES2015_BUILTIN_* guards to JERRY_BUILTIN_*
- Moved es2015 specific tests to a new 'es.next' subdirectory
- Updated docs, targets, and test runners to reflect these changes
Resolves#3737.
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
Overflows in conversions from floating-point to integer are
undefined behavior in the C99 standard. (Clause 6.3.1.4: "If the
value of the integral part cannot be represented by the integer
type, the behavior is undefined.")
When UBSAN is enabled, this gets reported at `srand()` calls. (The
random seed is usually initialized using the date port API, which
represents dates as `double`s. But `srand` takes an `unsigned int`.
A simple cast from `double` to `unsigned` becomes undefined
behavior if the value is too large. And "now" is too large
nowadays. So, effectively, all executions start with an undefined
behavior.)
This patch fixes this by casting the floating-point value of the
date to an integer through a union.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Follow-up after #3015
The fix backport has landed, and the branch has been deleted. Revert back to
the the v1.14 branch.
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
The current module implementation resolves module paths relative to the
current working directory, but paths should be resolved relative to the
currently evaluated module/source.
This requires a change in the jerry_port_normalize_path port API
function, so that it also takes the current module path as an argument.
On the engine side, we now also create a module object for the main
script, so that we can properly identify the base path for other
modules.
Co-authored-by: Marko Fabo <mfabo@inf.u-szeged.hu>
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
When using ES6 modules it was not possible to identify which module
an error originates from.
This PR changes the error message to also include the file path using
the file:line:column format, and updates the source context printing for
unhandled exceptions to use the correct file.
Co-authored-by: Marko Fabo <mfabo@inf.u-szeged.hu>
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* The following macros are now 0/1 switches:
** Renamed CONFIG_ECMA_LCACHE_DISABLE to JERRY_LCACHE.
** Renamed CONFIG_ECMA_PROPERTY_HASHMAP_DISABLE to JERRY_PROPERTY_HASHMAP.
** Renamed CONFIG_DISABLE_UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
** Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
** Renamed JERRY_DISABLE_JS_PARSER to JERRY_PARSER.
** Renamed JERRY_ENABLE_ERROR_MESSAGES to JERRY_ERROR_MESSAGES.
** Renamed JERRY_ENABLE_EXTERNAL_CONTEXT to JERRY_EXTERNAL_CONTEXT.
** Renamed JERRY_ENABLE_LINE_INFO to JERRY_LINE_INFO.
** Renamed JERRY_ENABLE_LOGGING to JERRY_LOGGING.
** Renamed JERRY_ENABLE_SNAPSHOT_EXEC to JERRY_SNAPSHOT_EXEC.
** Renamed JERRY_ENABLE_SNAPSHOT_SAVE to JERRY_SNAPSHOT_SAVE.
** Renamed JERRY_SYSTEM_ALLOCATOR to JERRY_SYSTEM_ALLOCATOR.
** Renamed JERRY_VM_EXEC_STOP to JERRY_VM_EXEC_STOP.
** Renamed JMEM_GC_BEFORE_EACH_ALLOC to JERRY_MEM_GC_BEFORE_EACH_ALLOC.
** Renamed JMEM_STATS to JERRY_MEM_STATS.
** Renamed PARSER_DUMP_BYTE_CODE to JERRY_PARSER_DUMP_BYTE_CODE.
** Renamed REGEXP_DUMP_BYTE_CODE to JERRY_REGEXP_DUMP_BYTE_CODE.
* Recursion check changes:
** Renamed REGEXP_RECURSION_LIMIT to JERRY_REGEXP_RECURSION_LIMIT.
** Renamed VM_RECURSION_LIMIT to JERRY_VM_RECURSION_LIMIT.
* Attribute macro changes:
** Renamed JERRY_CONST_DATA to JERRY_ATTR_CONST_DATA.
** Renamed JERRY_HEAP_SECTION_ATTR to JERRY_ATTR_GLOBAL_HEAP.
Now the macro can specify any attribute for the global heap object.
* Other macro changes:
** Renamed CONFIG_MEM_HEAP_AREA_SIZE to JERRY_GLOBAL_HEAP_SIZE.
Then new macro now specify the global heap size in kilobytes.
* Updated documentations to reflect the new macro names.
For more deatils please see jerry-core/config.h.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
The NuttX target has been problematic for some time, due to the fact
that NuttX apps are built with NuttX's own libc implementation, while
the default-port in JerryScript was compiled with the host libc, which
caused a mismatch between the two.
In order to work around this issue, most of the port implementation is already
duplicated in the NuttX target's jerry_main.c.
This PR adds a NuttX specific port implementation by moving the already
implemented port functions from jerry_main into a separate file, adding
implementation for the missing functions, and disabling the default-port
in JerryScript.
Co-authored-by: Marko Fabo <mfabo@inf.u-szeged.hu>
JerryScript-DCO-1.0-Signed-off-by: Marko Fabo mfabo@inf.u-szeged.hu
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
Currently JS objects can only have one native pointer data which could be a limitation in special cases.
This patch allows to register multiple native infos, which can be accessed/associated with the corresponding `jerry_object_native_info_t`.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* Renamed all CONFIG_DISABLE_<name>_BUILTIN macro to JERRY_BUILTIN_<name> format.
* The special JERRY_BUILTINS macro specifies the basic config for all es5.1 builtins.
* Renamed all CONFIG_DISABLE_ES2015_<name> to JERRY_ES2015_<name> format.
* The special JERRY_ES2015 macro specifies the basic config for all es2015 builtins.
* Renamed UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
* All options (in this change) can have a value of 0 or 1.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
JERRY_REGEXP_STRICT_MODE is set to 0 by default.
* Reworked CONFIG_ECMA_NUMBER_TYPE macro to JERRY_NUMBER_TYPE_FLOAT64 name and now
it uses the value 1 for 64 bit floating point numbers and 0 for 32 bit floating point
number.
By default the 64-bit floating point number mode is enabled.
* All new JERRY_ defines can be used wit the `#if ENABLED (JERRY_...)` construct to
test if the feature is enabled or not.
* Added/replaced a few config.h includes to correctly propagate the macro values.
* Added sanity checks for each macro to avoid incorrectly set values.
* Updated profile documentation.
* The CMake feature names are not updated at this point.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
In the previous approach `jerryx_port_handler_print_char` was implemented
in by the jerry-default-port. This implementation however required the
jerry-ext handler header file which created a requirement in the
jerry-default-port for the jerry-ext headers.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Current build test uses and documentation refers to release 1.1,
however, 2.0 has been out since Oct 2018. This commit bumps the
target to that latest release.
Co-authored-by: Roland Takacs <rtakacs.uszeged@partner.samsung.com>
JerryScript-DCO-1.0-Signed-off-by: Roland Takacs rtakacs.uszeged@partner.samsung.com
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The git hash mbed-os.lib was pointing to marked Mbed OS 5.5.5 and
was more than a year old and more than 10.000 commits behind latest
mbed-os master.
This commit forwards the reference to the latest Mbed OS release
(5.11.1).
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Both documentation and travis makefile were referring to NuttX 7.22,
which was released in Sep 2017. This commit bumps the version to the
latest release (7.27, from Nov 2018).
Additionally, it also sets the stlink tool to a fixed (and tagged)
version.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Until now, the ESP8266 target used a non-tagged git hash revision
of the RTOS SDK (from Oct 2017). Moreover, the compiler was also a
custom-built gcc.
This commit sets the RTOS SDK version to v2.1.0, released Oct 2018,
which is the latest old-style SDK for ESP. The commit also changes
the used gcc to an Espressif-provided pre-built toolchain, which is
tagged for the (latest) v3.0.1 SDK release.
(The SDK bump is not to the latest SDK version because the new
v3.x line of the SDK is "ESP-IDF style", which is incompatible with
the current target code base. On the other hand, the toolchain
comes from the latest SDK release because the v2.x line had no
pre-built toolchain suggestions -- but it builds v2.x sources
correctly.)
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Recent failures of the Mbed OS target came from two independent
issues:
- some python packages started requiring Python>=2.7.10, and
- the latest Intervaltree 3.0.0 release was released broken.
This patch ensures a fresh python by 'lying' to the CI that this
is a Python project (Python images on the CI come with a recent
interpreter, not with the one shipped as default with the OS), and
locks Intervaltree to a stable version.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Since recently, the newly released mbed-host-tests 1.4.4 gets
installed during the python requirement installation step. That
package requires pyocd>=0.14.0, which cannot be satisfied for
whatever reason. This quick fix pins mbed-host-tests to version
1.4.2, which does not have unsatisfiable requirements.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
