`JERRY_UNREACHABLE`s often signal code structure that could be
improved: they can usually either be rewritten to `JERRY_ASSERT`s
or eliminated by restructuring loops, `if`s or `#if`s. Roughly,
the only valid occurences are in default cases of `switch`es. And
even they can often be merged into non-default cases.
Moreover, it is dangerous to write meaningful code after
`JERRY_UNREACHABLE` because it pretends as if there was a way to
recover from an impossible situation.
This patch rewrites/eliminates `JERRY_UNREACHABLE`s where possible
and removes misleading code from after them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
A lot of warnings remained hibben because 'EXTRACT_ALL' was previously set to YES.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Unlike normal snapshots, no part of a static snapshot is loaded into
the RAM when executed from ROM. Static snapshots rely heavily on
external magic strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Greatly simplify the iterator part and make it compatible with 32 bit cpointers.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
NuttX and artik053 build - compiling with strict Werror=conversion - fail when jerry-debugger option is enabled.
This patch based on #2007, because most of them are fixed earlier within that PR, but it was closed before the land.
Credit: Piotr Marcinkiewicz p.marcinkiew@samsung.com
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Functions has several built-in non-enumerable properties, and
they are correctly ignored during enumeration after this patch.
External function prototype is also lazy enumerated.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Several properties of strict and bound functions are moved to
lazy property instantiation. The memory consumption of bound
functions are also reduced when only a this is present.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
During building jerryscript with arm-gcc-noneeabi 4.9.3,
maybe-uninitialized warning occurred. This patch fixed the warning.
JerryScript-DCO-1.0-Signed-off-by: Sanggyu Lee sg5.lee@samsung.com
Change CONFIG_DISABLE_ES2015_ARRAYBUFFER_BUILTIN to
CONFIG_DISABLE_ES2015_TYPEDARRAY_BUILTIN
Because typedarray depends on arraybuffer and it doesn't make sense to
enable arraybuffer only.
JerryScript-DCO-1.0-Signed-off-by: Zidong Jiang zidong.jiang@intel.com
* add %TypedArray% intrinsic object
* implement Int8Array
* will implement other types and prototype functions
in the following patches.
JerryScript-DCO-1.0-Signed-off-by: Zidong Jiang zidong.jiang@intel.com
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
Property names were always required a string reference which consumed
a large amount of memory for arrays. This patch reduces this consumption
by directly storing the value part of certain strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This change allows easier access to array length which improves
the performance of inserting new items into an array and there
is no need to allocate length strings anymore. The trade-of is
that array length cannot be cached anymore.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Free a new bit in the property descriptor by combining internal
and special property types into one group. Also simplify checking
special properties since bit-and operation is not needed anymore.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch reduces memory consumption for strings such as "0" or "123"
by 8 bytes and "4294967295" by 16 bytes. The hash computation is changed
for using the lower 16 bits for these strings which is much faster than
converting the value to string first and compute the hash. The trade-of
is a small overhead when strings are created or concatenated.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Instead of allocating a helper object, argument names are appended right
after the arguments objects. This reduces memory consumption and improve
performance as well. In the future this could be further improved by a
bitfield, but that would require a reference to the byte code which
might increase memory consumption in a few corner cases.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Class and value internal properties are always exists for primitive
types (e.g. Boolean, Regex) so they can be stored right after the
object. This improve property access (since internal properties are
searched by a slow linear algorithm) and reduces memory consumption,
since only 8 byte is allocated for these two properties instead of
16 which is the size of a property pair.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The new set does not allocate memory when the size of the array is reduced.
Furthermore the [[PutObject]] method directly calls the new length setter.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch changes define own property to search a property only once.
Currently all existing properties are searched at least twice, sometimes
three times which is not optimal.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Properties are changed to a type and value pair instead of a pointer to an internal
representation. Functions such as ecma_op_object_get_[own_]property do not
return with property pointers anymore.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The ecma_op_object_get_[own_]property calls should be phased out from
the project eventually and virtual properties should be introduced instead.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Removing a lot of ECMA_PROPERTY_VALUE_PTR macro calls. The only drawback
is free callbacks for native objects cannot be deleted anymore. Redefining
a free callback is a rare case, so this trade-of is acceptable.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The standard doesn't defines ECMAScript Compact Profile as a subset of Ecma-262 Edition 5.1.
Profile modes can be added easily like the minimal profile if required.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
* Removed jerry_string_t and jerry_object_t
* Updated function names
* Updated return values
* Updated function descriptions
* Added new functions
* Added new unittests
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Several internal properties are removed and directly stored as
part of the object. Faster built-in and JS function processing.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
