Create a local lexical environment with the name of the function. While
this is not too memory efficient, some corner cases requires its existence.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The issue was found when debugging IoT.js with static snapshots turned on, if an error was thrown an assertion failure was caused. The reason is the frame context's bytecode_header_p pointer was not a heap pointer. The jerry_debugger_breakpoint_hit function tries to set a compressed pointer which points to bytecode_header_p with the JMEM_CP_SET_NON_NULL_POINTER macro, which has an assertion that requires the above mentioned bytecode_header_p to be a heap pointer, which is obviously not.
Co-authored-by: Robert Fancsik frobert@inf.u-szeged.hu
JerryScript-DCO-1.0-Signed-off-by: Daniel Balla dballa@inf.u-szeged.hu
Exec operations{call, construct, super_call} related bytecode sequences no longer executed twice.
The execution continues with the next opcode or a specific bytecode sequence if an error occurs during the operation.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
VM_OC_PROP_GET is the general vm instruction for getting an object's property.
This opcode can be mutated into several other opcodes depending on the context (pre- post increment, ident reference).
Since these mutated opcodes perform additional checks and VM_OC_PROP_GET is a highly frequent instruction and it is worth to introduce a special case for it.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch removes the ECMA_IS_VALUE_ERROR check from VM_OC_NOT, since the general toBoolean operation cannot throw an exception.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
In with contexts the object base value must be resolved before executing a call operation.
Since this happens rarely the base resolving code paths has been seperated to an other VM opcode
so these extra checks do not burden the general property call steps.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
The following stucture was highly frequented in the code base:
- Get a builtin object // This operation increases the reference count of the object
- Use it for create a new object
- Deref the builtin object
After a builtin has been instantiated there is always at least one reference to "keep it alive",
so increase/decrease the reference count for getting the value only is unnecessary.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Currently it evaluates the given expression in the context of the top most stack frame.
The expression should access to any variables and arguments that are in the scope chain.
Implement the eval_at request with the level of the scope chain as a further argument.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
It supports to list the scope chain of the current execution context and see
which variables are available.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
This patch is the second milestone of the implementation of this new language element.
Supported:
- Single class inheritance
- Functionality of 'super' keyword
- Implicit constructor in class heritage
- Specific behaviour while extending with the built-in 'Array' or '%TypedArray%' object
- Abstract subclasses (Mix-ins)
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Also disable ES5.1 property name dumplication checks
when ES2015 object literals are enabled.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The removed flag can be substituted with the combination of two existing ones.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch is the first milestone of the implementation of this new language element.
Currently supported:
- Class statement
- Class expression
- Static methods
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Only the global object bound to the root node of the lexical environment
tree does not have a provideThis flag, and ecma_op_implicit_this_value()
falls back to the global object. Hence we get the same effect regardless
of provideThis.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
`JERRY_UNREACHABLE`s often signal code structure that could be
improved: they can usually either be rewritten to `JERRY_ASSERT`s
or eliminated by restructuring loops, `if`s or `#if`s. Roughly,
the only valid occurences are in default cases of `switch`es. And
even they can often be merged into non-default cases.
Moreover, it is dangerous to write meaningful code after
`JERRY_UNREACHABLE` because it pretends as if there was a way to
recover from an impossible situation.
This patch rewrites/eliminates `JERRY_UNREACHABLE`s where possible
and removes misleading code from after them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Binary operations are much faster with literal arguments.
The byte immediates are still kept for other cases, e.g. array declarations.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
A lot of warnings remained hibben because 'EXTRACT_ALL' was previously set to YES.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Add line info data to byte, which allows getting a backtrace info directly
from the engine. Snapshots are not supported.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
In some cases the debugger catches (reports) the same
exception multiple times. This is confusing since these
not new errors. This patch fixes this behaviour.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Aborts are not caught by catch/finally blocks,
so it is possible to stop a script using the debugger.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch makes it possible to throw an error from the python debugger client using the `throw` command.
JerryScript-DCO-1.0-Signed-off-by: Daniel Balla dballa@inf.u-szeged.hu
Unlike normal snapshots, no part of a static snapshot is loaded into
the RAM when executed from ROM. Static snapshots rely heavily on
external magic strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Aborts are similar to exceptions except they are not caught by catch
and finally blocks. Callbacks should honor aborts as well and return
them without processing them. Aborts are never thrown by JavaScript
code.
In the future certain events such as out-of-memory condition may
also throw aborts.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Greatly simplify the iterator part and make it compatible with 32 bit cpointers.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch improves the ecma_integers_values multiplication by checking if the multiplier or multiplicand is power of 2.
If it is it uses right shift instead of multiplication.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
The affected function calls have been replaced with the appropriate arithmetic operands.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This change frees up the error bit in ecma_value_t, which allows
to define 4 more value types (e.g. symbols). To keep API
compatibility we introduce a box for values with error flag.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Several properties of strict and bound functions are moved to
lazy property instantiation. The memory consumption of bound
functions are also reduced when only a this is present.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
With this feature the debugger webIDE and the python client can able to send a source code to the debugger while that is running in wait mode.
This feature can be activated with the --debugger-wait-source switch and the debugger will wait for the source messages.
If every message part are received the debugger will continue the exectuion with the initalized options.
JerryScript-DCO-1.0-Signed-off-by: Imre Kiss kissi.szeged@partner.samsung.com
Check breakpoint stop condition even after a message is processed.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Currently we keep all local variables in the scope chain as long as
a nested function is alive. These variables consume memory although
several of them are never used. This patch focuses on removing those
unused ones whose can be detected at parsing time.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
