When using ES6 modules it was not possible to identify which module
an error originates from.
This PR changes the error message to also include the file path using
the file:line:column format, and updates the source context printing for
unhandled exceptions to use the correct file.
Co-authored-by: Marko Fabo <mfabo@inf.u-szeged.hu>
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* The following macros are now 0/1 switches:
** Renamed CONFIG_ECMA_LCACHE_DISABLE to JERRY_LCACHE.
** Renamed CONFIG_ECMA_PROPERTY_HASHMAP_DISABLE to JERRY_PROPERTY_HASHMAP.
** Renamed CONFIG_DISABLE_UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
** Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
** Renamed JERRY_DISABLE_JS_PARSER to JERRY_PARSER.
** Renamed JERRY_ENABLE_ERROR_MESSAGES to JERRY_ERROR_MESSAGES.
** Renamed JERRY_ENABLE_EXTERNAL_CONTEXT to JERRY_EXTERNAL_CONTEXT.
** Renamed JERRY_ENABLE_LINE_INFO to JERRY_LINE_INFO.
** Renamed JERRY_ENABLE_LOGGING to JERRY_LOGGING.
** Renamed JERRY_ENABLE_SNAPSHOT_EXEC to JERRY_SNAPSHOT_EXEC.
** Renamed JERRY_ENABLE_SNAPSHOT_SAVE to JERRY_SNAPSHOT_SAVE.
** Renamed JERRY_SYSTEM_ALLOCATOR to JERRY_SYSTEM_ALLOCATOR.
** Renamed JERRY_VM_EXEC_STOP to JERRY_VM_EXEC_STOP.
** Renamed JMEM_GC_BEFORE_EACH_ALLOC to JERRY_MEM_GC_BEFORE_EACH_ALLOC.
** Renamed JMEM_STATS to JERRY_MEM_STATS.
** Renamed PARSER_DUMP_BYTE_CODE to JERRY_PARSER_DUMP_BYTE_CODE.
** Renamed REGEXP_DUMP_BYTE_CODE to JERRY_REGEXP_DUMP_BYTE_CODE.
* Recursion check changes:
** Renamed REGEXP_RECURSION_LIMIT to JERRY_REGEXP_RECURSION_LIMIT.
** Renamed VM_RECURSION_LIMIT to JERRY_VM_RECURSION_LIMIT.
* Attribute macro changes:
** Renamed JERRY_CONST_DATA to JERRY_ATTR_CONST_DATA.
** Renamed JERRY_HEAP_SECTION_ATTR to JERRY_ATTR_GLOBAL_HEAP.
Now the macro can specify any attribute for the global heap object.
* Other macro changes:
** Renamed CONFIG_MEM_HEAP_AREA_SIZE to JERRY_GLOBAL_HEAP_SIZE.
Then new macro now specify the global heap size in kilobytes.
* Updated documentations to reflect the new macro names.
For more deatils please see jerry-core/config.h.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* Renamed all CONFIG_DISABLE_<name>_BUILTIN macro to JERRY_BUILTIN_<name> format.
* The special JERRY_BUILTINS macro specifies the basic config for all es5.1 builtins.
* Renamed all CONFIG_DISABLE_ES2015_<name> to JERRY_ES2015_<name> format.
* The special JERRY_ES2015 macro specifies the basic config for all es2015 builtins.
* Renamed UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
* All options (in this change) can have a value of 0 or 1.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
JERRY_REGEXP_STRICT_MODE is set to 0 by default.
* Reworked CONFIG_ECMA_NUMBER_TYPE macro to JERRY_NUMBER_TYPE_FLOAT64 name and now
it uses the value 1 for 64 bit floating point numbers and 0 for 32 bit floating point
number.
By default the 64-bit floating point number mode is enabled.
* All new JERRY_ defines can be used wit the `#if ENABLED (JERRY_...)` construct to
test if the feature is enabled or not.
* Added/replaced a few config.h includes to correctly propagate the macro values.
* Added sanity checks for each macro to avoid incorrectly set values.
* Updated profile documentation.
* The CMake feature names are not updated at this point.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Also add a missing word from `PARSER_ERR_FORMAL_PARAM_AFTER_REST_PARAMETER` error message.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Create a local lexical environment with the name of the function. While
this is not too memory efficient, some corner cases requires its existence.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch is the second milestone of the implementation of this new language element.
Supported:
- Single class inheritance
- Functionality of 'super' keyword
- Implicit constructor in class heritage
- Specific behaviour while extending with the built-in 'Array' or '%TypedArray%' object
- Abstract subclasses (Mix-ins)
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Clang 6 is more picky about implicit conversions and complains
about loss of presicion and/or change of signedness.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
There are some leftover global functions in the code that are not
referenced at all anymore. These functions are removed by this
patch.
There are also some global functions that are only used in their
own modules. These functions are made static by this patch.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The removed flag can be substituted with the combination of two existing ones.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch is the first milestone of the implementation of this new language element.
Currently supported:
- Class statement
- Class expression
- Static methods
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Currently the byte code start is incorrectly set when
a non-strict arguments object is present, and a random
memory area is dumped as byte code.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
A literal might be not freed if it is stored in a register,
and PARSER_DUMP_BYTE_CODE is enabled, but opcodes are not shown.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Binary operations are much faster with literal arguments.
The byte immediates are still kept for other cases, e.g. array declarations.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
A lot of warnings remained hibben because 'EXTRACT_ALL' was previously set to YES.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Add line info data to byte, which allows getting a backtrace info directly
from the engine. Snapshots are not supported.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Remove several macros and types from it. This change simplifies
the external debugger interface.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
After this patch, all sunspider tests run when cpointer 32 is enabled.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Aborts are similar to exceptions except they are not caught by catch
and finally blocks. Callbacks should honor aborts as well and return
them without processing them. Aborts are never thrown by JavaScript
code.
In the future certain events such as out-of-memory condition may
also throw aborts.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Compiled code blocks are sized in multiples of JMEM_ALIGNMENT,
but it's possible that some bytes at the end remain unused and get filled
with junk. This causes snapshot output to become nondeterministic.
To fix this, zero out the compiled code buffer before using it.
JerryScript-DCO-1.0-Signed-off-by: Martijn The martijn.the@intel.com
Before this patch the JS execution is started right after the parsing
is completed. The problem is that some parts of the JS code is executed
before the debugger had any chance to insert pending breakpoints due
to network latency. This patch adds a delay after parsing when at least
one pendding breakpoint is available.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Since the JerryScript can able to parse functions directly the
PARSER_LEXICAL_ENV_NEEDED and the PARSER_NO_REG_STORE flags
should be in the context's status flags for executing eval operations
by the debugger.
JerryScript-DCO-1.0-Signed-off-by: Imre Kiss kissi.szeged@partner.samsung.com
This change frees up the error bit in ecma_value_t, which allows
to define 4 more value types (e.g. symbols). To keep API
compatibility we introduce a box for values with error flag.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
* Replace JERRY_JS_PARSER feature guard with JERRY_DISABLE_JS_PARSER
All feature guards of jerry-core are deciding about the inclusion
or exclusion of a feature based on the state (defined or undefined)
of a macro -- except for the JS parser guard, which requires
`JERRY_JS_PARSER` to be defined with a value of either 0 or 1. This
has some issues:
- The engine cannot be built with a "clean" compiler invocation,
i.e., without any `-D` command line macro definitions. This is
painful for targets that must use a different build system from
the project's own python/cmake-based one.
- Some build systems in targets and even some code in jerry-code
are already confused about the different semantics of
`JERRY_JS_PARSER`, and simply define it without a value and make
decisions based on the macro being simply defined or not.
This patch renames the guard to `JERRY_DISABLE_JS_PARSER` and makes
use of it in jerry-core based on its state, not based on its value.
As obvious from the guard name, the default for the JS parser is
that it is included in the build.
The patch also touches those targets in the repository that
explicitly defined the original macro (correctly or incorrectly).
* Make cppcheck verbose
Cppcheck can be quite slow sometimes, especially on Travis CI,
which has a "10 mins without output means failure" rule. As the
code base of the project grows, we start to undeterministically
fall over that limit. Thus, this PR makes cppcheck verbose to
ensure that it keeps Travis CI continuously fed with output.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Note: the special this behaviour of arrow functions is not implemented.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch adds direct function source code parsing, which
is useful to avoid source code duplications. The patch
also improves the Function constructor.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
If a literal was assigned the unused flag it wasn't freed, however it could have been not empty, therefore should've been freed.
JerryScript-DCO-1.0-Signed-off-by: Daniel Balla dballa@inf.u-szeged.hu
From now on, jerry_debugger_send_string can send a subtype of the string, making it more simple to send over strings with special parameters, therefore seperating different types of messages are simpler.
Enumerations for various subtypes can be made, while there's only need to have 2 entries for the header type.
JerryScript-DCO-1.0-Signed-off-by: Daniel Balla dballa@inf.u-szeged.hu
Without the file renaming there are two jerry-debugger.c files.
Thus when the jerry-core archive is created there are two objects
in it with the same name. Generally this does not create any problems.
However if the archive is extracted then the second object file
will overwrite the first one which results in undefined reference
linkage error.
The jerry- prefix was removed from the file names and
fixed the include oreders where it was needed.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Currently we keep all local variables in the scope chain as long as
a nested function is alive. These variables consume memory although
several of them are never used. This patch focuses on removing those
unused ones whose can be detected at parsing time.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
