In newest ES standard limit parameter is calculated using
ToUint32 function instead of ToLength.
JerryScript-DCO-1.0-Signed-off-by: Rafal Walczyna r.walczyna@samsung.com
A list of changes:
- 'es2015-subset' profile is deprecated, and an 'es.next' profile is added.
- The default profile is changed to 'es.next'
- Renamed the JERRY_ES2015 guard to JERRY_ESNEXT
- Renamed JERRY_ES2015_BUILTIN_* guards to JERRY_BUILTIN_*
- Moved es2015 specific tests to a new 'es.next' subdirectory
- Updated docs, targets, and test runners to reflect these changes
Resolves#3737.
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
This change includes several bugfixes, general improvements, and support
for additional features.
- Added full support for web compatibility syntax defined in Annex B
- Implemented parsing and matching patterns in unicode mode
- Fixed capture results when iterating with nested capturing groups
- Significantly reduced regexp bytecode size
- Reduced stack usage during regexp execution
- Improved matching performance
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
The release of the regexp pattern string during creating
was incorrect as it was dereferenced a bit to early.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.usz@partner.samsung.com
In ES2015 many builtin prototypes are no longer valid instances of their
respective classes. This change updates affected prototypes to be
regular objects as required.
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
The following methods have been implemented:
- RegExpAlloc, based on ECMA-262 v6, 21.2.3.2.1
- RegExpInitialize, based on ECMA-262 v6, 22.2.3.2.2
- RegExpCreate, based on ECMA-262 v6, 21.2.3.2.3
Co-authored-by: Robert Fancsik frobert@inf.u-szeged.hu
JerryScript-DCO-1.0-Signed-off-by: Adam Szilagyi aszilagy@inf.u-szeged.hu
Changes:
- Use the pre-scanner to provide information for the parser about the existence of the class constructor
- The allocation of the super declarative environment is no longer needed
- The VM frame context holds the information about the this binding status
- Reduce the number of class related VM/CBC instructions
- Improve ecma_op_function_{construct, call} to properly set new.target
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
A large rework because surrogate pairs must be combined.
Currently only the 0x10C80..0x10CF2 is accepted as valid identifier character from the non-basic plane.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The algorithm is based on ECMA-262 v6, 21.2.5.6
The following helper methods are also implemented:
- RegExpExec: ECMA-262 v6, 21.2.5.2.1
- AdvanceStringIndex: ECMA-262 v6, 21.2.5.2.3
JerryScript-DCO-1.0-Signed-off-by: Adam Szilagyi aszilagy@inf.u-szeged.hu
This change brings the replace operation up to date with ES6 by
implementing support for the @@replace well-known symbol, while
also improving performance and memory usage.
Also fixes#3070.
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
Similar to the ecma_op_to_object rework, in this new method we
return directly with the pointer to the ecma string, and we don't
wrap the result into an ecma_value_t
JerryScript-DCO-1.0-Signed-off-by: Adam Szilagyi aszilagy@inf.u-szeged.hu
This patch removes the ecma_property_descriptor_t structure bitfields and substitutes it with an uint16_t flag field
to reduce the cost of the transformation from/into the ecma_property_flags_t.
Also the is_throw last arguments is embedded to the property descriptor structure during the property defining process to reduce the number of arguments of the function.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch unifies the recursion limit checking for RegExp, function call and JSON as well.
Until now the limit was only a counter which was increased/decreased at certain points.
This counter has been substituted with a numeric limit which allows to restrict the stack usage.
This patch fixes#2963 and resolves the closed#2258 issue.
Co-authored-by: Gabor Loki loki@inf.u-szeged.hu
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* The following macros are now 0/1 switches:
** Renamed CONFIG_ECMA_LCACHE_DISABLE to JERRY_LCACHE.
** Renamed CONFIG_ECMA_PROPERTY_HASHMAP_DISABLE to JERRY_PROPERTY_HASHMAP.
** Renamed CONFIG_DISABLE_UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
** Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
** Renamed JERRY_DISABLE_JS_PARSER to JERRY_PARSER.
** Renamed JERRY_ENABLE_ERROR_MESSAGES to JERRY_ERROR_MESSAGES.
** Renamed JERRY_ENABLE_EXTERNAL_CONTEXT to JERRY_EXTERNAL_CONTEXT.
** Renamed JERRY_ENABLE_LINE_INFO to JERRY_LINE_INFO.
** Renamed JERRY_ENABLE_LOGGING to JERRY_LOGGING.
** Renamed JERRY_ENABLE_SNAPSHOT_EXEC to JERRY_SNAPSHOT_EXEC.
** Renamed JERRY_ENABLE_SNAPSHOT_SAVE to JERRY_SNAPSHOT_SAVE.
** Renamed JERRY_SYSTEM_ALLOCATOR to JERRY_SYSTEM_ALLOCATOR.
** Renamed JERRY_VM_EXEC_STOP to JERRY_VM_EXEC_STOP.
** Renamed JMEM_GC_BEFORE_EACH_ALLOC to JERRY_MEM_GC_BEFORE_EACH_ALLOC.
** Renamed JMEM_STATS to JERRY_MEM_STATS.
** Renamed PARSER_DUMP_BYTE_CODE to JERRY_PARSER_DUMP_BYTE_CODE.
** Renamed REGEXP_DUMP_BYTE_CODE to JERRY_REGEXP_DUMP_BYTE_CODE.
* Recursion check changes:
** Renamed REGEXP_RECURSION_LIMIT to JERRY_REGEXP_RECURSION_LIMIT.
** Renamed VM_RECURSION_LIMIT to JERRY_VM_RECURSION_LIMIT.
* Attribute macro changes:
** Renamed JERRY_CONST_DATA to JERRY_ATTR_CONST_DATA.
** Renamed JERRY_HEAP_SECTION_ATTR to JERRY_ATTR_GLOBAL_HEAP.
Now the macro can specify any attribute for the global heap object.
* Other macro changes:
** Renamed CONFIG_MEM_HEAP_AREA_SIZE to JERRY_GLOBAL_HEAP_SIZE.
Then new macro now specify the global heap size in kilobytes.
* Updated documentations to reflect the new macro names.
For more deatils please see jerry-core/config.h.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* Renamed all CONFIG_DISABLE_<name>_BUILTIN macro to JERRY_BUILTIN_<name> format.
* The special JERRY_BUILTINS macro specifies the basic config for all es5.1 builtins.
* Renamed all CONFIG_DISABLE_ES2015_<name> to JERRY_ES2015_<name> format.
* The special JERRY_ES2015 macro specifies the basic config for all es2015 builtins.
* Renamed UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
* All options (in this change) can have a value of 0 or 1.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
JERRY_REGEXP_STRICT_MODE is set to 0 by default.
* Reworked CONFIG_ECMA_NUMBER_TYPE macro to JERRY_NUMBER_TYPE_FLOAT64 name and now
it uses the value 1 for 64 bit floating point numbers and 0 for 32 bit floating point
number.
By default the 64-bit floating point number mode is enabled.
* All new JERRY_ defines can be used wit the `#if ENABLED (JERRY_...)` construct to
test if the feature is enabled or not.
* Added/replaced a few config.h includes to correctly propagate the macro values.
* Added sanity checks for each macro to avoid incorrectly set values.
* Updated profile documentation.
* The CMake feature names are not updated at this point.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
The regexp engine does not have any recursion depth check, thus it can cause problems with various regexps. Added a new build option `--regexp-recursion-limit N` whose
default value is 0, which is for unlimited recursion depth. Also added a build-option-test.
Fixes#2448Fixes#2190
JerryScript-DCO-1.0-Signed-off-by: Istvan Miklos imiklos2@inf.u-szeged.hu
The following stucture was highly frequented in the code base:
- Get a builtin object // This operation increases the reference count of the object
- Use it for create a new object
- Deref the builtin object
After a builtin has been instantiated there is always at least one reference to "keep it alive",
so increase/decrease the reference count for getting the value only is unnecessary.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch uses the ECMA_PROPERTY_CONFIGURABLE[_ENUMERABLE_[WRITABLE]] marco to pass the options instead of using 3 boolean arguments for it.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
`JERRY_UNREACHABLE`s often signal code structure that could be
improved: they can usually either be rewritten to `JERRY_ASSERT`s
or eliminated by restructuring loops, `if`s or `#if`s. Roughly,
the only valid occurences are in default cases of `switch`es. And
even they can often be merged into non-default cases.
Moreover, it is dangerous to write meaningful code after
`JERRY_UNREACHABLE` because it pretends as if there was a way to
recover from an impossible situation.
This patch rewrites/eliminates `JERRY_UNREACHABLE`s where possible
and removes misleading code from after them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
A lot of warnings remained hibben because 'EXTRACT_ALL' was previously set to YES.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Greatly simplify the iterator part and make it compatible with 32 bit cpointers.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This is a workaround for an ASAN issue and a small optimization as well.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
