When using ES6 modules it was not possible to identify which module
an error originates from.
This PR changes the error message to also include the file path using
the file:line:column format, and updates the source context printing for
unhandled exceptions to use the correct file.
Co-authored-by: Marko Fabo <mfabo@inf.u-szeged.hu>
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
The NuttX target has been problematic for some time, due to the fact
that NuttX apps are built with NuttX's own libc implementation, while
the default-port in JerryScript was compiled with the host libc, which
caused a mismatch between the two.
In order to work around this issue, most of the port implementation is already
duplicated in the NuttX target's jerry_main.c.
This PR adds a NuttX specific port implementation by moving the already
implemented port functions from jerry_main into a separate file, adding
implementation for the missing functions, and disabling the default-port
in JerryScript.
Co-authored-by: Marko Fabo <mfabo@inf.u-szeged.hu>
JerryScript-DCO-1.0-Signed-off-by: Marko Fabo mfabo@inf.u-szeged.hu
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
In the previous approach `jerryx_port_handler_print_char` was implemented
in by the jerry-default-port. This implementation however required the
jerry-ext handler header file which created a requirement in the
jerry-default-port for the jerry-ext headers.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Both documentation and travis makefile were referring to NuttX 7.22,
which was released in Sep 2017. This commit bumps the version to the
latest release (7.27, from Nov 2018).
Additionally, it also sets the stlink tool to a fixed (and tagged)
version.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The previous jerry_port interface did not allow timezones to be handled correctly,
even if the host system was up to the task. This PR changes the jerry_port interface
to allow a completely correct implementation to exist, and provides one (for Linux/BSD
systems) in default-date.c.
Fixes#1661
JerryScript-DCO-1.0-Signed-off-by: crazy2be crazy1be@gmail.com
Their length (size) is known at compile time. Therefore `sizeof`
is more efficient for them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Rationale:
- There is no port under targets/ that would use it. All of them
turn it off when building.
- That's no surprise, as jerry-libc supports no barebone MCUs but
posix targets with syscalls only. Actually, that's Linux only,
because macOS builds have turned off the use of jerry-libc a
while ago.
- And there is no point in maintaining a highly restricted set of
libc functions: as soon as someone wants to use JerryScript in a
scenario that needs more functions than jerry-main, they have to
choose a different libc (most problably the compiler's default
one).
I think that we should not keep supporting an otherwise unused
library for the purposes of jerry-main on arm/x86/x64-linux only.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Container-based VMs promise significantly faster boot times.
More or less related changes:
- Added a JOBNAME to all jobs.
- Added `install-noapt` target to several Makefile.travis files to
avoid `sudo apt-get install ...` steps. Those installations are
now handled by the apt addon of Travis. The `install` targets are
kept anyway to keep the makefiles self-contained.
- Removed a legacy workaround from the Coverity Scan job as it
isn't necessary anymore to fiddle with the cerificates of
scan.coverity.com.
- Fixed the Mbed and the Zephyr jobs.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Remove jerry_parse_named_resource, merge its arguments to jerry_parse
and change is_strict argument to an option list for possible future extensions.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The error value is released in the print_unhandled_exception function, however
that value is used and released later. This patch fixes this bug.
JerryScript-DCO-1.0-Signed-off-by: Roland Takacs rtakacs.uszeged@partner.samsung.com
New api function:
* jerry_get_error_type
Additionally update a few places where this new function
can be used.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Modified the Makefile of the NuttX target to build only the application
file (targets/nuttx-stm32f4/jerry-main.c) and not the whole project.
It helps to build JerryScript separately and use the static libs when
building NuttX.
Also modified the README.md to describe the new build process.
JerryScript-DCO-1.0-Signed-off-by: Roland Takacs rtakacs.uszeged@partner.samsung.com
Fixes issue #2094, which introduced an error caused by jerry_value_is_syntax_error.
The problem was that the function used strcmp instead of strncmp while checking if err_str_buf contains syntax error and it caused buffer overflow.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Hitherto, code under the `targets` directory was not tested and so
its maintenance was sometimes speculative. This commit adds build
testing for several targets to prevent them from bit rotting.
Targets covered by this commit are: ESP8266, Mbed, Mbed OS 5,
NuttX, RIOT, Tizen RT, and Zephyr.
Some issues were revealed and fixed:
- ESP8266: added missing include for `uint32_t` typedef.
- Tizen RT: replaced missing `str_to_uint` with `strtol`.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
* Replace JERRY_JS_PARSER feature guard with JERRY_DISABLE_JS_PARSER
All feature guards of jerry-core are deciding about the inclusion
or exclusion of a feature based on the state (defined or undefined)
of a macro -- except for the JS parser guard, which requires
`JERRY_JS_PARSER` to be defined with a value of either 0 or 1. This
has some issues:
- The engine cannot be built with a "clean" compiler invocation,
i.e., without any `-D` command line macro definitions. This is
painful for targets that must use a different build system from
the project's own python/cmake-based one.
- Some build systems in targets and even some code in jerry-code
are already confused about the different semantics of
`JERRY_JS_PARSER`, and simply define it without a value and make
decisions based on the macro being simply defined or not.
This patch renames the guard to `JERRY_DISABLE_JS_PARSER` and makes
use of it in jerry-core based on its state, not based on its value.
As obvious from the guard name, the default for the JS parser is
that it is included in the build.
The patch also touches those targets in the repository that
explicitly defined the original macro (correctly or incorrectly).
* Make cppcheck verbose
Cppcheck can be quite slow sometimes, especially on Travis CI,
which has a "10 mins without output means failure" rule. As the
code base of the project grows, we start to undeterministically
fall over that limit. Thus, this PR makes cppcheck verbose to
ensure that it keeps Travis CI continuously fed with output.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
* Remove 'jerry_debugger_cleaup'. Do it automatically in 'jerry_cleanup'.
* Updated the documentations.
* Updated the NuttX and Artik053 targets.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
I included jerry-ext/handler only, rather than including all in jerry-ext.
Currently only handler is used in nuttx-stm32f4 repl.
nuttx.bin binary size is reduced from 231576 to 230456 bytes.
JerryScript-DCO-1.0-Signed-off-by: Sanggyu Lee sg5.lee@samsung.com
The built-in `print` is removed from jerry-core, but an external
`print` implementation is added to jerry-main. From now on, all
embedders of the engine have to implement their own `print` if they
need such a functionality.
For printing results in REPL mode of jerry-main, the external
`print` handler is called directly instead of looking up the `print`
function registered into the global object. (The two are the same,
but the indirection is not needed anymore.)
Because jerry-core does not contain `print` anymore,
`jerry_port_console` is removed from the port API. The default port
is updated, i.e., the implementation of `jerry_port_console` is
removed. Additionally, all references to `jerry_port_console` in
jerry-main are replaced by `printf`.
Speculatively, `jerry_port_console` is also removed from all
non-default targets. Most targets implemented it for the sake of the
engine only; in those targets the removal was trivial. Where the
function was called from the embedder application as well, the
calls were replaced with equivalents (e.g., `printf`, `printk`).
NOTE 1: This is a breaking change!
NOTE 2: This patch still leaves several targets without a JS `print`
implementation.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
All public headers should follow the pattern `jerryscript[-*].h`.
The `jerry-api.h` to `jerryscript.h` renaming has already happened
a while ago, now it's time for the port API header to follow.
This patch
* renames the public header file,
* updates all includes to use the new file name (in `jerry-main`,
in all the targets, and in the docs), and
* keeps `jerry-port.h` as a deprecated forwarding header to leave
some time for external users to follow up with this change.
As a related change, the header of the default port implementation
is also changed to `jerryscript-port-default.h`.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The `jerry_port_jobqueue_enqueue` function is undefined on this target.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
Function definitions with no parameters should always use the void keyword to allow the compiler to catch invalid calls of those functions at compile time.
Enable -Wold-style-definition to catch this early in the future.
Fixes#1649.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
Using jerry_parse_named_resource to parse script and construct an EcmaScript function.
The file name will also passed to this function which is used by the debugger to find
the source code.
Run the constructed EcmaScript function instead of using the simple jerry runner.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
Add a notification for JerryScript API users that the jerry-api.h
will be removed in the future and should use the jerryscript.h
header instead.
Also update the examples in the docs and the targets where
the jerry-api.h is used.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
