`JERRY_UNREACHABLE`s often signal code structure that could be
improved: they can usually either be rewritten to `JERRY_ASSERT`s
or eliminated by restructuring loops, `if`s or `#if`s. Roughly,
the only valid occurences are in default cases of `switch`es. And
even they can often be merged into non-default cases.
Moreover, it is dangerous to write meaningful code after
`JERRY_UNREACHABLE` because it pretends as if there was a way to
recover from an impossible situation.
This patch rewrites/eliminates `JERRY_UNREACHABLE`s where possible
and removes misleading code from after them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Greatly simplify the iterator part and make it compatible with 32 bit cpointers.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch adds two new string concatenation functions:
ecma_append_chars_to_string and ecma_append_magic_string_to_string
The former appends a cesu8 byte array and the latter appends a magic string
to the end of an ecma-string. These two free (dereference) their ecma-string
argument, and this change is also applied to the original ecma_concat_ecma_strings
function which simplifies string handling in most cases.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
The JSON parser required a zero terminated writable copy of
the original string. The requirement is eliminated from the
project to reduce peak memory consumption.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
Properties are changed to a type and value pair instead of a pointer to an internal
representation. Functions such as ecma_op_object_get_[own_]property do not
return with property pointers anymore.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The standard doesn't defines ECMAScript Compact Profile as a subset of Ecma-262 Edition 5.1.
Profile modes can be added easily like the minimal profile if required.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
The "length" property name is the most frequently used built-in string
and also frequently created by various hot-paths. New functions are
added to improve the speed of the "length" string creation.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Changed 'ecma_copy_or_ref_ecma_string' to 'ecma_ref_ecma_string'. It does
not copy the string if the maximum number of reference counter is reached,
but bails out with an error like the 'ecma_ref_object' function does.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Parts:
* Rename ecma_string_to_utf8_string() to ecma_string_copy_to_utf8_buffer.
* Introduce ecma_string_to_utf8_bytes(), which wraps the usual 'function call-assertion' pair,
and check strict equality of size of the string and the buffer.
JerryScript-DCO-1.0-Signed-off-by: Zsolt Borbély zsborbely.u-szeged@partner.samsung.com
the three boolean arguments of ecma_create_named_data_property and the
two boolean arguments of ecma_create_named_accessor_property are combined
into one uint8_t argument. On ARM-32 it is preferred to have less than
four arguments, since these arguments can be passed in registers.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The 'mem_' prefix is too general, so it might clash with
symbols in other libraries. Renamed the directory, file,
funtion and type names.
Related issue: #1052
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
itself seems a step back, but the primary aim is opening future
optimization opportunities. The list of changes follows:
- Property is changed to be an abstract type, which has type, flags,
and a value. It does not have a name anymore and property pointers
cannot be compressed.
- Full (32 bit) ecma values can be property values. This allows
using non-compressed pointers for ecma values in the future.
- The property chain is not restricted to the same item anymore,
it can contain hash maps, arrays in the future.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Benefits:
* Better readability and maintenance
* Better heap consumption on 'date-format-xparb.js' test of SunSpider
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
* inline some hot function
* add 'ecma_copy_value_if_not_object' similer to 'ecma_value_free_if_not_object'
* remove unnecessary helpers
* improve 'do_number_bitwise_logic'
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Use empty string for message property of builtin error objects
by default. Add ERROR_MESSAGES build option.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
E.g.,
* `ssize_t` was used where `lit_utf8_size_t` or `jerry_api_size_t`
would have been correct,
* `lit_utf8_size_t` was used where `ecma_length_t` would have been
correct.
Note, the patch also includes internal and public API changes:
* `ecma_string_to_utf8_string` does not return negative value if
output buffer is not large enough to contain the string; the
buffer is expected to be large enough. (`ecma_string_get_size`
can be used to retrieve the required size.)
* `jerry_api_string_to_char_buffer` adapts the same logic (and
`jerry_api_get_string_size` can be used to determine the
required size of the buffer).
Related issue: #942
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Remove ecma_completion_value_t, and add an extra bit to
ecma_value_t to represent errors. From the long list of
completion types only normal and error remained.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
* Fix "end of file while inside a group" doxygen warnings.
* Fix "unknown command" doxygen warnings caused by incorrect
argument references. Instead of `@foo`, `@a foo` is the proper
format.
* Fix "unknown command" doxygen warnings caused by incorrect
parameter direction specifications. Instead of `@in`, `@out`,
and `@in-out`, `[in]`, `[out]`, and `[in,out]` are the proper
formats.
* Wrapping special characters in quotes to avoid doxygen
confusion. Raw pipe, semicolon, dot, backslash, etc. characters
can drive doxygen into various misinterpretations and warnings.
E.g.:
```
End of list marker found without any preceding list items
Found unknown command
```
Putting quotes around such text snipets eliminates the errors.
* Fix the documentation of `ecma_builtin_global_object_print`. Raw
<> and \ sequences confused doxygen in various ways (it tried to
interpret them as XML tags and doxygen commands).
* Fix "ignoring title that does not match old title" doxygen
warnings. At some places, the group titles were out of sync, at
others, the group names were incorrect.
* Fix "parameters are not documented" doxygen warnings. Fixing
various typos in the inline parameter documentations (`/*`,
`/**`, `/** <`, and `/**>` are all considered incorrect, the
right format is `/**<`).
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
