Only the global object bound to the root node of the lexical environment
tree does not have a provideThis flag, and ecma_op_implicit_this_value()
falls back to the global object. Hence we get the same effect regardless
of provideThis.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
* Rewritten 128-bit integer "type" to use two 64-bit ints (they are
enough), and made it a proper struct instead of an array.
* Rewritten all single-bit shift loops to multi-bit shifts with the
help of CLZ, and used `__builtin_clzll` where available.
* Simplified (and documented) 128-bit DIV10 operation.
* Renamed 128-bit integer handling macros to use simpler names.
(And removed unused macros that were laying around.)
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
When the `jerry_substring_to_utf8_char_buffer` was called
with direct strings the assert incorrectly assumed that the
string is a ref counted string and tried to access the
refcount value resulting in a failed assert.
Added direct string check for the underlying implementation
and created a test case for such simple string.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
As a result of earlier developments, there remained no other
instatiations of the `ALLOC`, `DEALLOC`, and `DECLARE_ROUTINES_FOR`
templates. So, it's simpler to write the alloc/dealloc routines
directly for `ecma_number_t` as well.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
`JERRY_UNREACHABLE`s often signal code structure that could be
improved: they can usually either be rewritten to `JERRY_ASSERT`s
or eliminated by restructuring loops, `if`s or `#if`s. Roughly,
the only valid occurences are in default cases of `switch`es. And
even they can often be merged into non-default cases.
Moreover, it is dangerous to write meaningful code after
`JERRY_UNREACHABLE` because it pretends as if there was a way to
recover from an impossible situation.
This patch rewrites/eliminates `JERRY_UNREACHABLE`s where possible
and removes misleading code from after them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
A lot of warnings remained hibben because 'EXTRACT_ALL' was previously set to YES.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
In the `ecma_string_get_chars` method
the contents of a direct string is accessed incorrectly.
It tries to extract the magic string id from the
string pointer but the direct string does not need
this step.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Unlike normal snapshots, no part of a static snapshot is loaded into
the RAM when executed from ROM. Static snapshots rely heavily on
external magic strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Aborts are similar to exceptions except they are not caught by catch
and finally blocks. Callbacks should honor aborts as well and return
them without processing them. Aborts are never thrown by JavaScript
code.
In the future certain events such as out-of-memory condition may
also throw aborts.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
New API functions:
- jerry_create_arraybuffer_external
- jerry_get_arraybuffer_pointer
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
Greatly simplify the iterator part and make it compatible with 32 bit cpointers.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch adds two new string concatenation functions:
ecma_append_chars_to_string and ecma_append_magic_string_to_string
The former appends a cesu8 byte array and the latter appends a magic string
to the end of an ecma-string. These two free (dereference) their ecma-string
argument, and this change is also applied to the original ecma_concat_ecma_strings
function which simplifies string handling in most cases.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
NuttX and artik053 build - compiling with strict Werror=conversion - fail when jerry-debugger option is enabled.
This patch based on #2007, because most of them are fixed earlier within that PR, but it was closed before the land.
Credit: Piotr Marcinkiewicz p.marcinkiew@samsung.com
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
This patch improves the ecma_integers_values multiplication by checking if the multiplier or multiplicand is power of 2.
If it is it uses right shift instead of multiplication.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
The affected function calls have been replaced with the appropriate arithmetic operands.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
'ecma_clear_error_reference' must increase the reference of the returned
ecma value referenced by the error if there are more than one reference.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
This patch fixes this bug which caused corrupted stack by preventing unnecessary double to ascii conversion even if
the convertible number of digits is higher than allowed.
In addition, improved ecma_double_to_binary_floating_point function by removing a needless buffer.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch extends the infinity and zero parsing of the convertible number by checking the normalized number exponent part.
This improvement prevents the engine's hanging while converting extreme big numbers.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This change frees up the error bit in ecma_value_t, which allows
to define 4 more value types (e.g. symbols). To keep API
compatibility we introduce a box for values with error flag.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch adds an extension to snapshots which allows storing
multiple position independent primary functions in a single
snapshot data. A new application called jerry-snapshot is
added to the project to manage snapshots. Currently the only
option is merging snapshots.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This unreported test issue revealed an assertion in jmem_heap_finalize ().
During the conversion the lot of additional information what a cesu8 represented string needs caused overflow while setting the new ecma_string_t variable's length. This patch fixes this issue and the mentioned test case is available here:
https://gist.github.com/rerobika/3bd590fdcf664a3fcfcc98f11b14c74e
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Several properties of strict and bound functions are moved to
lazy property instantiation. The memory consumption of bound
functions are also reduced when only a this is present.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Fixes#1367.
From now numbers are represented as binary floating-point which guarantees the expected operation of toFixed function.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
With this feature the debugger webIDE and the python client can able to send a source code to the debugger while that is running in wait mode.
This feature can be activated with the --debugger-wait-source switch and the debugger will wait for the source messages.
If every message part are received the debugger will continue the exectuion with the initalized options.
JerryScript-DCO-1.0-Signed-off-by: Imre Kiss kissi.szeged@partner.samsung.com
Convert debug server port from a compile-time constant to a context
variable. This enables each engine instance (either running in the
same process or in different processes) to listen for connections
at different ports, i.e., multiple engines can be debugged at the
same time on the same machine.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Without the file renaming there are two jerry-debugger.c files.
Thus when the jerry-core archive is created there are two objects
in it with the same name. Generally this does not create any problems.
However if the archive is extracted then the second object file
will overwrite the first one which results in undefined reference
linkage error.
The jerry- prefix was removed from the file names and
fixed the include oreders where it was needed.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
JerryScript should support external context, heap and lcache,
so that it can have multiple instances and runtime configurable heap
size.
Related issue: 1746
JerryScript-DCO-1.0-Signed-off-by: Zidong Jiang zidong.jiang@intel.com
* Move the job queue from the ports into jerry-core
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
* Remove port notification and keep `jerry_run_all_enqueued_jobs` API only
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
