There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* The following macros are now 0/1 switches:
** Renamed CONFIG_ECMA_LCACHE_DISABLE to JERRY_LCACHE.
** Renamed CONFIG_ECMA_PROPERTY_HASHMAP_DISABLE to JERRY_PROPERTY_HASHMAP.
** Renamed CONFIG_DISABLE_UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
** Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
** Renamed JERRY_DISABLE_JS_PARSER to JERRY_PARSER.
** Renamed JERRY_ENABLE_ERROR_MESSAGES to JERRY_ERROR_MESSAGES.
** Renamed JERRY_ENABLE_EXTERNAL_CONTEXT to JERRY_EXTERNAL_CONTEXT.
** Renamed JERRY_ENABLE_LINE_INFO to JERRY_LINE_INFO.
** Renamed JERRY_ENABLE_LOGGING to JERRY_LOGGING.
** Renamed JERRY_ENABLE_SNAPSHOT_EXEC to JERRY_SNAPSHOT_EXEC.
** Renamed JERRY_ENABLE_SNAPSHOT_SAVE to JERRY_SNAPSHOT_SAVE.
** Renamed JERRY_SYSTEM_ALLOCATOR to JERRY_SYSTEM_ALLOCATOR.
** Renamed JERRY_VM_EXEC_STOP to JERRY_VM_EXEC_STOP.
** Renamed JMEM_GC_BEFORE_EACH_ALLOC to JERRY_MEM_GC_BEFORE_EACH_ALLOC.
** Renamed JMEM_STATS to JERRY_MEM_STATS.
** Renamed PARSER_DUMP_BYTE_CODE to JERRY_PARSER_DUMP_BYTE_CODE.
** Renamed REGEXP_DUMP_BYTE_CODE to JERRY_REGEXP_DUMP_BYTE_CODE.
* Recursion check changes:
** Renamed REGEXP_RECURSION_LIMIT to JERRY_REGEXP_RECURSION_LIMIT.
** Renamed VM_RECURSION_LIMIT to JERRY_VM_RECURSION_LIMIT.
* Attribute macro changes:
** Renamed JERRY_CONST_DATA to JERRY_ATTR_CONST_DATA.
** Renamed JERRY_HEAP_SECTION_ATTR to JERRY_ATTR_GLOBAL_HEAP.
Now the macro can specify any attribute for the global heap object.
* Other macro changes:
** Renamed CONFIG_MEM_HEAP_AREA_SIZE to JERRY_GLOBAL_HEAP_SIZE.
Then new macro now specify the global heap size in kilobytes.
* Updated documentations to reflect the new macro names.
For more deatils please see jerry-core/config.h.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
This fixes an assertion failure which was caused by incorrectly importing
the same variables multiple times.
Co-authored-by: Marko Fabo <mfabo@inf.u-szeged.hu>
JerryScript-DCO-1.0-Signed-off-by: Marko Fabo mfabo@inf.u-szeged.hu
JerryScript-DCO-1.0-Signed-off-by: Dániel Bátyai dbatyai@inf.u-szeged.hu
A class expression can be part of any kind of expression since the asserts for the stack position calculation were incorrect.
This patch fixes#2819.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* Renamed all CONFIG_DISABLE_<name>_BUILTIN macro to JERRY_BUILTIN_<name> format.
* The special JERRY_BUILTINS macro specifies the basic config for all es5.1 builtins.
* Renamed all CONFIG_DISABLE_ES2015_<name> to JERRY_ES2015_<name> format.
* The special JERRY_ES2015 macro specifies the basic config for all es2015 builtins.
* Renamed UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
* All options (in this change) can have a value of 0 or 1.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
JERRY_REGEXP_STRICT_MODE is set to 0 by default.
* Reworked CONFIG_ECMA_NUMBER_TYPE macro to JERRY_NUMBER_TYPE_FLOAT64 name and now
it uses the value 1 for 64 bit floating point numbers and 0 for 32 bit floating point
number.
By default the 64-bit floating point number mode is enabled.
* All new JERRY_ defines can be used wit the `#if ENABLED (JERRY_...)` construct to
test if the feature is enabled or not.
* Added/replaced a few config.h includes to correctly propagate the macro values.
* Added sanity checks for each macro to avoid incorrectly set values.
* Updated profile documentation.
* The CMake feature names are not updated at this point.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
when the vm executes VM_OC_LESS operation, the lookahead optimization will cause the by-passing of vm stop checking.
Thus we need to disable the optimization here if JERRY_VM_EXEC_STOP is defined.
JerryScript-DCO-1.0-Signed-off-by: Wang Zhikang wzk0406@mail.ustc.edu.cn
This patch adds posibility to supervise the VM call stack to avoid aborts/crashes due to the recursion calls.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch is the proper fix for #2667, since #2269 did not fix the problem entirely.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch contains the base functionalities that the new builtin object requires.
Currently unavailable:
- print (Symbol('foo')) - this features requires the refactor of the print handler function
- Several global symbol based builtin routines (follow up patch)
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch substitutes all binary lvalue operators with an assigment + the corresponding binary operator.
E.g. A += (expression) is pasred as A = A + (expression).
Due to this replacement, all the related binary lvalue CBC opcodes can be removed.
Also the arithmetic related VM instructions can put their result directly onto the stack, since no more checking is needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
- `ERR_SYSCALL` is a legacy that has not been used anymore since
the removal of jerry-libc. This commit removes it from the port
API.
- `ERR_DISABLED_BYTE_CODE` is a (relatively) recent addition to the
fatal code enum. At the time it was added, the documentation has
not been updated. This commit adds the missing documentation.
(Plus, it removes a superfluous `JERRY_UNREACHABLE` from after a
`jerry_fatal (ERR_DISABLED_BYTE_CODE)`.)
Note: As the port API is modified, this is an API-breaking change.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Create a local lexical environment with the name of the function. While
this is not too memory efficient, some corner cases requires its existence.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The issue was found when debugging IoT.js with static snapshots turned on, if an error was thrown an assertion failure was caused. The reason is the frame context's bytecode_header_p pointer was not a heap pointer. The jerry_debugger_breakpoint_hit function tries to set a compressed pointer which points to bytecode_header_p with the JMEM_CP_SET_NON_NULL_POINTER macro, which has an assertion that requires the above mentioned bytecode_header_p to be a heap pointer, which is obviously not.
Co-authored-by: Robert Fancsik frobert@inf.u-szeged.hu
JerryScript-DCO-1.0-Signed-off-by: Daniel Balla dballa@inf.u-szeged.hu
Exec operations{call, construct, super_call} related bytecode sequences no longer executed twice.
The execution continues with the next opcode or a specific bytecode sequence if an error occurs during the operation.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
VM_OC_PROP_GET is the general vm instruction for getting an object's property.
This opcode can be mutated into several other opcodes depending on the context (pre- post increment, ident reference).
Since these mutated opcodes perform additional checks and VM_OC_PROP_GET is a highly frequent instruction and it is worth to introduce a special case for it.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch removes the ECMA_IS_VALUE_ERROR check from VM_OC_NOT, since the general toBoolean operation cannot throw an exception.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
In with contexts the object base value must be resolved before executing a call operation.
Since this happens rarely the base resolving code paths has been seperated to an other VM opcode
so these extra checks do not burden the general property call steps.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
The following stucture was highly frequented in the code base:
- Get a builtin object // This operation increases the reference count of the object
- Use it for create a new object
- Deref the builtin object
After a builtin has been instantiated there is always at least one reference to "keep it alive",
so increase/decrease the reference count for getting the value only is unnecessary.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Currently it evaluates the given expression in the context of the top most stack frame.
The expression should access to any variables and arguments that are in the scope chain.
Implement the eval_at request with the level of the scope chain as a further argument.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
It supports to list the scope chain of the current execution context and see
which variables are available.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
This patch is the second milestone of the implementation of this new language element.
Supported:
- Single class inheritance
- Functionality of 'super' keyword
- Implicit constructor in class heritage
- Specific behaviour while extending with the built-in 'Array' or '%TypedArray%' object
- Abstract subclasses (Mix-ins)
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Also disable ES5.1 property name dumplication checks
when ES2015 object literals are enabled.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The removed flag can be substituted with the combination of two existing ones.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
This patch is the first milestone of the implementation of this new language element.
Currently supported:
- Class statement
- Class expression
- Static methods
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
Only the global object bound to the root node of the lexical environment
tree does not have a provideThis flag, and ecma_op_implicit_this_value()
falls back to the global object. Hence we get the same effect regardless
of provideThis.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
`JERRY_UNREACHABLE`s often signal code structure that could be
improved: they can usually either be rewritten to `JERRY_ASSERT`s
or eliminated by restructuring loops, `if`s or `#if`s. Roughly,
the only valid occurences are in default cases of `switch`es. And
even they can often be merged into non-default cases.
Moreover, it is dangerous to write meaningful code after
`JERRY_UNREACHABLE` because it pretends as if there was a way to
recover from an impossible situation.
This patch rewrites/eliminates `JERRY_UNREACHABLE`s where possible
and removes misleading code from after them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Binary operations are much faster with literal arguments.
The byte immediates are still kept for other cases, e.g. array declarations.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
A lot of warnings remained hibben because 'EXTRACT_ALL' was previously set to YES.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Add line info data to byte, which allows getting a backtrace info directly
from the engine. Snapshots are not supported.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
In some cases the debugger catches (reports) the same
exception multiple times. This is confusing since these
not new errors. This patch fixes this behaviour.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Aborts are not caught by catch/finally blocks,
so it is possible to stop a script using the debugger.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch makes it possible to throw an error from the python debugger client using the `throw` command.
JerryScript-DCO-1.0-Signed-off-by: Daniel Balla dballa@inf.u-szeged.hu
Unlike normal snapshots, no part of a static snapshot is loaded into
the RAM when executed from ROM. Static snapshots rely heavily on
external magic strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Direct strings are a new type of direct ecma-values (no memory allocation
is needed for encoding them) in JerryScript. Currently magic strings,
external magic strings and uint values are encoded as direct strings.
The constant pool of JerryScript byte-code is changed to hold ecma-values
rather than cpointers to support direct strings.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
