There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* The following macros are now 0/1 switches:
** Renamed CONFIG_ECMA_LCACHE_DISABLE to JERRY_LCACHE.
** Renamed CONFIG_ECMA_PROPERTY_HASHMAP_DISABLE to JERRY_PROPERTY_HASHMAP.
** Renamed CONFIG_DISABLE_UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
** Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
** Renamed JERRY_DISABLE_JS_PARSER to JERRY_PARSER.
** Renamed JERRY_ENABLE_ERROR_MESSAGES to JERRY_ERROR_MESSAGES.
** Renamed JERRY_ENABLE_EXTERNAL_CONTEXT to JERRY_EXTERNAL_CONTEXT.
** Renamed JERRY_ENABLE_LINE_INFO to JERRY_LINE_INFO.
** Renamed JERRY_ENABLE_LOGGING to JERRY_LOGGING.
** Renamed JERRY_ENABLE_SNAPSHOT_EXEC to JERRY_SNAPSHOT_EXEC.
** Renamed JERRY_ENABLE_SNAPSHOT_SAVE to JERRY_SNAPSHOT_SAVE.
** Renamed JERRY_SYSTEM_ALLOCATOR to JERRY_SYSTEM_ALLOCATOR.
** Renamed JERRY_VM_EXEC_STOP to JERRY_VM_EXEC_STOP.
** Renamed JMEM_GC_BEFORE_EACH_ALLOC to JERRY_MEM_GC_BEFORE_EACH_ALLOC.
** Renamed JMEM_STATS to JERRY_MEM_STATS.
** Renamed PARSER_DUMP_BYTE_CODE to JERRY_PARSER_DUMP_BYTE_CODE.
** Renamed REGEXP_DUMP_BYTE_CODE to JERRY_REGEXP_DUMP_BYTE_CODE.
* Recursion check changes:
** Renamed REGEXP_RECURSION_LIMIT to JERRY_REGEXP_RECURSION_LIMIT.
** Renamed VM_RECURSION_LIMIT to JERRY_VM_RECURSION_LIMIT.
* Attribute macro changes:
** Renamed JERRY_CONST_DATA to JERRY_ATTR_CONST_DATA.
** Renamed JERRY_HEAP_SECTION_ATTR to JERRY_ATTR_GLOBAL_HEAP.
Now the macro can specify any attribute for the global heap object.
* Other macro changes:
** Renamed CONFIG_MEM_HEAP_AREA_SIZE to JERRY_GLOBAL_HEAP_SIZE.
Then new macro now specify the global heap size in kilobytes.
* Updated documentations to reflect the new macro names.
For more deatils please see jerry-core/config.h.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* Renamed all CONFIG_DISABLE_<name>_BUILTIN macro to JERRY_BUILTIN_<name> format.
* The special JERRY_BUILTINS macro specifies the basic config for all es5.1 builtins.
* Renamed all CONFIG_DISABLE_ES2015_<name> to JERRY_ES2015_<name> format.
* The special JERRY_ES2015 macro specifies the basic config for all es2015 builtins.
* Renamed UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
* All options (in this change) can have a value of 0 or 1.
* Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
JERRY_REGEXP_STRICT_MODE is set to 0 by default.
* Reworked CONFIG_ECMA_NUMBER_TYPE macro to JERRY_NUMBER_TYPE_FLOAT64 name and now
it uses the value 1 for 64 bit floating point numbers and 0 for 32 bit floating point
number.
By default the 64-bit floating point number mode is enabled.
* All new JERRY_ defines can be used wit the `#if ENABLED (JERRY_...)` construct to
test if the feature is enabled or not.
* Added/replaced a few config.h includes to correctly propagate the macro values.
* Added sanity checks for each macro to avoid incorrectly set values.
* Updated profile documentation.
* The CMake feature names are not updated at this point.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
This patch:
* Ensures that all calls to `jerry_port_log` in jerry-core happen
via macros defined in jrt.h. Also, it unifies the names of those
macros: as `JERRY_ERROR_MSG` and `JERRY_WARNING_MSG` gave a good
pattern that was well aligned with the naming scheme of the log
level enum, `JERRY_DLOG` and `JERRY_DDLOG` were rewritten to
`JERRY_DEBUG_MSG` and `JERRY_TRACE_MSG`.
* Ensures that all debug logging code parts of jerry-core (i.e.,
memory statistics, JS byte-code dumps, and RegExp byte-code
dumps) are guarded by macros: `JMEM_STATS`,
`PARSER_DUMP_BYTE_CODE`, and `REGEXP_DUMP_BYTE_CODE`, which in
turn are controled by cmake build system feature flags
`FEATURE_MEM_STATS`, `FEATURE_PARSER_DUMP`, and
`FEATURE_REGEXP_DUMP`.
* Ensures that all debug logging functionalities can be controled
during run time (provided that they were enabled during build
time): the engine has `JERRY_INIT_MEM_STATS[_SEPARATE]`,
`JERRY_INIT_SHOW_OPCODES`, `JERRY_INIT_SHOW_REGEXP_OPCODES` init
flags, and the default unix/linux command line app has
corresponding command line switches.`
* Drops `FEATURE_LOG`, `JERRY_ENABLE_LOG`, and
`JERRY_INIT_ENABLE_LOG`, as their name was misleadingly general,
even though they mostly controled the regexp engine only. The
above-mentioned `*REGEXP*` things mostly act as their
replacements.
* Updates build, test, and measurement tool scripts, and
documentation.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
The standard doesn't defines ECMAScript Compact Profile as a subset of Ecma-262 Edition 5.1.
Profile modes can be added easily like the minimal profile if required.
JerryScript-DCO-1.0-Signed-off-by: Robert Sipka rsipka.uszeged@partner.samsung.com
The 'mem_' prefix is too general, so it might clash with
symbols in other libraries. Renamed the directory, file,
funtion and type names.
Related issue: #1052
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
memory consumption, because the new allocator uses less memory if
the size as available when a block is freed. Snapshot generation
is also simplified.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Move RegExp bytecode functions to a separate file.
Optimize bytecode lenght on character matching.
Implement a basic RegExp cache to optimize memory
usage on duplicated RegExp in JS files. Also fix
minor style issues and add missing comments. Improve
existing comments.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
