There are quite a few configuration macros in the project.
As discussed in the #2520 issue there are a few awkward constructs.
Main changes:
* The following macros are now 0/1 switches:
** Renamed CONFIG_ECMA_LCACHE_DISABLE to JERRY_LCACHE.
** Renamed CONFIG_ECMA_PROPERTY_HASHMAP_DISABLE to JERRY_PROPERTY_HASHMAP.
** Renamed CONFIG_DISABLE_UNICODE_CASE_CONVERSION to JERRY_UNICODE_CASE_CONVERSION.
** Renamed ENABLE_REGEXP_STRICT_MODE to JERRY_REGEXP_STRICT_MODE.
** Renamed JERRY_DISABLE_JS_PARSER to JERRY_PARSER.
** Renamed JERRY_ENABLE_ERROR_MESSAGES to JERRY_ERROR_MESSAGES.
** Renamed JERRY_ENABLE_EXTERNAL_CONTEXT to JERRY_EXTERNAL_CONTEXT.
** Renamed JERRY_ENABLE_LINE_INFO to JERRY_LINE_INFO.
** Renamed JERRY_ENABLE_LOGGING to JERRY_LOGGING.
** Renamed JERRY_ENABLE_SNAPSHOT_EXEC to JERRY_SNAPSHOT_EXEC.
** Renamed JERRY_ENABLE_SNAPSHOT_SAVE to JERRY_SNAPSHOT_SAVE.
** Renamed JERRY_SYSTEM_ALLOCATOR to JERRY_SYSTEM_ALLOCATOR.
** Renamed JERRY_VM_EXEC_STOP to JERRY_VM_EXEC_STOP.
** Renamed JMEM_GC_BEFORE_EACH_ALLOC to JERRY_MEM_GC_BEFORE_EACH_ALLOC.
** Renamed JMEM_STATS to JERRY_MEM_STATS.
** Renamed PARSER_DUMP_BYTE_CODE to JERRY_PARSER_DUMP_BYTE_CODE.
** Renamed REGEXP_DUMP_BYTE_CODE to JERRY_REGEXP_DUMP_BYTE_CODE.
* Recursion check changes:
** Renamed REGEXP_RECURSION_LIMIT to JERRY_REGEXP_RECURSION_LIMIT.
** Renamed VM_RECURSION_LIMIT to JERRY_VM_RECURSION_LIMIT.
* Attribute macro changes:
** Renamed JERRY_CONST_DATA to JERRY_ATTR_CONST_DATA.
** Renamed JERRY_HEAP_SECTION_ATTR to JERRY_ATTR_GLOBAL_HEAP.
Now the macro can specify any attribute for the global heap object.
* Other macro changes:
** Renamed CONFIG_MEM_HEAP_AREA_SIZE to JERRY_GLOBAL_HEAP_SIZE.
Then new macro now specify the global heap size in kilobytes.
* Updated documentations to reflect the new macro names.
For more deatils please see jerry-core/config.h.
JerryScript-DCO-1.0-Signed-off-by: Peter Gal pgal.u-szeged@partner.samsung.com
The following stucture was highly frequented in the code base:
- Get a builtin object // This operation increases the reference count of the object
- Use it for create a new object
- Deref the builtin object
After a builtin has been instantiated there is always at least one reference to "keep it alive",
so increase/decrease the reference count for getting the value only is unnecessary.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
`JERRY_UNREACHABLE`s often signal code structure that could be
improved: they can usually either be rewritten to `JERRY_ASSERT`s
or eliminated by restructuring loops, `if`s or `#if`s. Roughly,
the only valid occurences are in default cases of `switch`es. And
even they can often be merged into non-default cases.
Moreover, it is dangerous to write meaningful code after
`JERRY_UNREACHABLE` because it pretends as if there was a way to
recover from an impossible situation.
This patch rewrites/eliminates `JERRY_UNREACHABLE`s where possible
and removes misleading code from after them.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
In general, public headers should not have compiler-specific
constructs but both the core and the port headers have attributes,
which are non-standard. It's better to factor out such constructs
to a common place (a new header) and hide them behind macros, which
can then be defined on a per-compiler basis.
This patch moves the existing definitions of function attributes and
likely/unlikely builtins to the new header. At the same time, it
unifies the names of these attribute defines and where they are
used. Moreover, it touches on jerry-main and removes the uses of
`__attribute__((unused))` entirely and replaces them with the
elsewhere used `(void) ...` pattern.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
This patch removes all ecma_make_simple_value calls to make the code more easy to understand.
Also removes the type ecma_simple_value_t which improves the performance in related code paths by calculating the value of new ecma_value_t is no longer needed.
JerryScript-DCO-1.0-Signed-off-by: Robert Fancsik frobert@inf.u-szeged.hu
PR #1505 added support for TI compiler. It explicitly added a
message to notify the user that static linking is forced. PR #1755
added a more generic approach to signal such forced settings and
adapted the TI-specific static linking notification to this
approach. However, it turned out that TI forcibly changed another
setting, too: it disabled release binary stripping, but without
notification. This patch fixes this by moving the setting override
to a consistent place and adding a notification.
PR #1505 also added some source code changes, most importantly a
complex struct initialization for a variable in
`ecma-objects-general.c`. However, that initialization was coded
as a macro to trick the style checker. This patch gets rid of that
macro and uses proper C99 struct initializer with designators.
JerryScript-DCO-1.0-Signed-off-by: Akos Kiss akiss@inf.u-szeged.hu
Jerryscript. The changes include:
CMakeLists.txt: we added conditionals around GCC-specific flags, added
support for TI flags, and removed the always-on debugging flag (-g)
/toolchain_mcu_tim4f.cmake: new toolchain file uses TI-specific parameters
jerry-api.h: the sys/types.h file was #include'd but never used, so we
removed it
jrt-types.h: ditto
jerry-port-default-date.c: the TI toolchain doesn't include
sys/time.h, so we guarded uses of the package
ecma-objects-general.c: added initialization that Travis (the
auto-checking tool) required
JerryScript-DCO-1.0-Signed-off-by: Timothy Harvey t-harvey@ti.com
* add %TypedArray% intrinsic object
* implement Int8Array
* will implement other types and prototype functions
in the following patches.
JerryScript-DCO-1.0-Signed-off-by: Zidong Jiang zidong.jiang@intel.com
Since the project is now hosted at the JS Foundation we can move to unified copyright notices for the project.
Starting with this commit all future contributions to the project should only carry the following copyright notice (except for third-party code which requires copyright information to be preserved):
"Copyright JS Foundation and other contributors, http://js.foundation" (without the quotes)
This avoids cluttering the codebase with contributor-specific copyright notices which have a higher maintenance overhead and tend to get outdated quickly. Also dropping the year from the copyright notices helps to avoid yearly code changes just to update the copyright notices.
Note that each contributor still retains full copyright ownership of his/her contributions and the respective authorship is tracked very accurately via Git.
JerryScript-DCO-1.0-Signed-off-by: Tilmann Scheller t.scheller@samsung.com
Free a new bit in the property descriptor by combining internal
and special property types into one group. Also simplify checking
special properties since bit-and operation is not needed anymore.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Class and value internal properties are always exists for primitive
types (e.g. Boolean, Regex) so they can be stored right after the
object. This improve property access (since internal properties are
searched by a slow linear algorithm) and reduces memory consumption,
since only 8 byte is allocated for these two properties instead of
16 which is the size of a property pair.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
This patch changes define own property to search a property only once.
Currently all existing properties are searched at least twice, sometimes
three times which is not optimal.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Properties are changed to a type and value pair instead of a pointer to an internal
representation. Functions such as ecma_op_object_get_[own_]property do not
return with property pointers anymore.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The ecma_op_object_get_[own_]property calls should be phased out from
the project eventually and virtual properties should be introduced instead.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
The "length" property name is the most frequently used built-in string
and also frequently created by various hot-paths. New functions are
added to improve the speed of the "length" string creation.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Several internal properties are removed and directly stored as
part of the object. Faster built-in and JS function processing.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
the three boolean arguments of ecma_create_named_data_property and the
two boolean arguments of ecma_create_named_accessor_property are combined
into one uint8_t argument. On ARM-32 it is preferred to have less than
four arguments, since these arguments can be passed in registers.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
function is removed and incorporated into ecma_op_general_object_put. Also most
properties are directly created / updated instead of using ecma_builtin_helper_def_prop.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
Unnecessary checks are removed, new checks are added to skip
unneeded code paths.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
itself seems a step back, but the primary aim is opening future
optimization opportunities. The list of changes follows:
- Property is changed to be an abstract type, which has type, flags,
and a value. It does not have a name anymore and property pointers
cannot be compressed.
- Full (32 bit) ecma values can be property values. This allows
using non-compressed pointers for ecma values in the future.
- The property chain is not restricted to the same item anymore,
it can contain hash maps, arrays in the future.
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
* inline some hot function
* add 'ecma_copy_value_if_not_object' similer to 'ecma_value_free_if_not_object'
* remove unnecessary helpers
* improve 'do_number_bitwise_logic'
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Use empty string for message property of builtin error objects
by default. Add ERROR_MESSAGES build option.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
Remove ecma_completion_value_t, and add an extra bit to
ecma_value_t to represent errors. From the long list of
completion types only normal and error remained.
JerryScript-DCO-1.0-Signed-off-by: László Langó llango.u-szeged@partner.samsung.com
JerryScript-DCO-1.0-Signed-off-by: Zoltan Herczeg zherczeg.u-szeged@partner.samsung.com
