Modify the build method of TizenRT target

Introduced a cmake/toolchain_mcu_artik053.cmake file that defines
all the target specific compiler options.

Modified the Makefile.tizenrt to do not copy the created static
libraries to the TizenRT folder. Instead, the application builder
Makefile (tizenrt-artik053/apps/jerryscript/Makefile) copies the
required static libraries to TizenRT.

JerryScript-DCO-1.0-Signed-off-by: Roland Takacs rtakacs.uszeged@partner.samsung.com

cmake/toolchain_mcu_artik053.cmake

@@ -0,0 +1,22 @@
+# Copyright JS Foundation and other contributors, http://js.foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set(CMAKE_SYSTEM_NAME TizenRT)
+set(CMAKE_SYSTEM_PROCESSOR armv7l)
+set(CMAKE_SYSTEM_VERSION ARTIK053)
+
+set(FLAGS_COMMON_ARCH -mcpu=cortex-r4 -mfpu=vfpv3 -fno-builtin -fno-strict-aliasing -fomit-frame-pointer -fno-strength-reduce -Wall -Werror -Wshadow -Wno-error=conversion)
+
+set(CMAKE_C_COMPILER arm-none-eabi-gcc)
+set(CMAKE_C_COMPILER_WORKS TRUE)

targets/tizenrt-artik053/Makefile.tizenrt

@@ -13,15 +13,8 @@
 # limitations under the License.
 
 JERRYHEAP	?= 16
-BUILD_DIR	?= build/tizenrt-artik053
-LIBTARGET_DIR	?= $(abspath $(PWD)/../TizenRT/build/output/libraries)
+BUILD_DIR	?= build
 
-EXT_CFLAGS += -mcpu=cortex-r4 -mfpu=vfpv3
-EXT_CFLAGS += -fno-builtin -fno-strict-aliasing
-EXT_CFLAGS += -fomit-frame-pointer
-EXT_CFLAGS += -fno-strength-reduce
-EXT_CFLAGS += -Wall -Werror -Wshadow
-EXT_CFLAGS += -Wno-error=conversion
 EXT_CFLAGS += -I. -isystem ../TizenRT/os/include
 
 .PHONY: libjerry clean
@@ -29,25 +22,17 @@ EXT_CFLAGS += -I. -isystem ../TizenRT/os/include
 all: libjerry
 
 libjerry:
-	mkdir -p $(BUILD_DIR)
-	mkdir -p $(LIBTARGET_DIR)
 	cmake -B$(BUILD_DIR) -H./ \
-	 -DCMAKE_SYSTEM_NAME=TizenRT \
-	 -DCMAKE_SYSTEM_PROCESSOR=armv7l \
-	 -DCMAKE_C_COMPILER=arm-none-eabi-gcc \
-	 -DCMAKE_C_COMPILER_WORKS=TRUE \
 	 -DENABLE_LTO=OFF \
 	 -DENABLE_ALL_IN_ONE=OFF \
 	 -DJERRY_LIBC=OFF \
 	 -DJERRY_CMDLINE=OFF \
 	 -DEXTERNAL_COMPILE_FLAGS="$(EXT_CFLAGS)" \
 	 -DMEM_HEAP_SIZE_KB=$(JERRYHEAP) \
-	 -DCMAKE_BUILD_TYPE=Release
+	 -DCMAKE_BUILD_TYPE=Release \
+	 -DCMAKE_TOOLCHAIN_FILE=cmake/toolchain_mcu_artik053.cmake
 
 	make -C$(BUILD_DIR) jerry-core jerry-libm jerry-ext
-	cp $(BUILD_DIR)/lib/libjerry-core.a $(LIBTARGET_DIR)
-	cp $(BUILD_DIR)/lib/libjerry-libm.a $(LIBTARGET_DIR)
-	cp $(BUILD_DIR)/lib/libjerry-ext.a $(LIBTARGET_DIR)
 
 clean:
 	rm -rf $(BUILD_DIR)

targets/tizenrt-artik053/README.md

@@ -81,6 +81,22 @@ $ mkdir res
 
 #### 5. Build JerryScript for TizenRT
 
+```
+# assuming you are in jerry-tizenrt folder
+jerryscript/tools/build.py \
+    --clean \
+    --lto=OFF \
+    --jerry-cmdline=OFF \
+    --jerry-libc=OFF \
+    --all-in-one=OFF \
+    --mem-heap=70 \
+    --profile=es2015-subset \
+    --compile-flag="--sysroot=${PWD}/TizenRT/os" \
+    --toolchain=${PWD}/jerryscript/cmake/toolchain_mcu_artik053.cmake
+```
+
+**Note**: there is a Makefile in the `targets/tizenrt-artik053/` folder that also helps to build JerryScript for TizenRT.
+
 ```
 # assuming you are in jerry-tizenrt folder
 $ cd jerryscript

targets/tizenrt-artik053/apps/jerryscript/Kconfig

@@ -27,23 +27,4 @@ config JERRYSCRIPT_STACKSIZE
 	int "Jerryscript stack size"
 	default 16384
 
-config JERRYSCRIPT_HEAPSIZE
-	int "Jerryscript heap size"
-	default 107520
-
-config JERRYSCRIPT_ERROR_MESSAGES
-	bool "Enable error messages for builtin error objects"
-	default n
-
-config JERRYSCRIPT_MEM_STATS
-	bool "Enable memory statistics"
-	default n
-
-config JERRYSCRIPT_SHOW_OPCODES
-	bool "Enable parser byte-code dumps"
-	default n
-
-config JERRYSCRIPT_DEBUGGER
-	bool "Jerryscript debugger"
-	default n
-endif
+endif # JERRYSCRIPT

targets/tizenrt-artik053/apps/jerryscript/Makefile

@@ -67,40 +67,28 @@
 -include $(TOPDIR)/Make.defs
 include $(APPDIR)/Make.defs
 
-# Jerryscript built-in application info
-
+# JerryScript built-in application information.
 CONFIG_JERRYSCRIPT_PRIORITY ?= SCHED_PRIORITY_DEFAULT
+CONFIG_JERRYSCRIPT_PROGNAME ?= jerry$(EXEEXT)
 CONFIG_JERRYSCRIPT_STACKSIZE ?= 32768
-CONFIG_JERRYSCRIPT_HEAPSIZE ?= 64000
 
-APPNAME = jerry
-# path to the project dir, "tizenrt-artik053" by default
-ROOT_DIR = ../../../..
 PRIORITY = $(CONFIG_JERRYSCRIPT_PRIORITY)
+PROGNAME = $(CONFIG_JERRYSCRIPT_PROGNAME)
 STACKSIZE = $(CONFIG_JERRYSCRIPT_STACKSIZE)
-CFLAGS += -std=c99 -DJERRY_NDEBUG '-DCONFIG_MEM_HEAP_AREA_SIZE=$(CONFIG_JERRYSCRIPT_HEAPSIZE)'
-CFLAGS += -I$(ROOT_DIR)/ $(shell find $(ROOT_DIR)/jerryscript/jerry-core -type d | sed -r -e 's/^/-I/g')
-CFLAGS += -I$(ROOT_DIR)/jerryscript/jerry-ext/include
 
-ifeq ($(CONFIG_JERRYSCRIPT_MEM_STATS),y)
-	CFLAGS += -DJMEM_STATS
-endif
-
-ifeq ($(CONFIG_JERRYSCRIPT_SHOW_OPCODES),y)
-	CFLAGS += -DPARSER_DUMP_BYTE_CODE
-endif
-
-ifeq ($(CONFIG_JERRYSCRIPT_DEBUGGER),y)
-	CFLAGS += -DJERRY_DEBUGGER
-endif
+# Path to the JerryScript project. If not specified, it is supposed
+# that JerryScript is located next to the TizenRT folder.
+JERRYSCRIPT_ROOT_DIR ?= ../../../../jerryscript
 
+CFLAGS += -std=c99
+CFLAGS += -I$(JERRYSCRIPT_ROOT_DIR)/jerry-core/include
+CFLAGS += -I$(JERRYSCRIPT_ROOT_DIR)/jerry-ext/include
 
 EXTRA_LIBS += libjerry-core.a libjerry-libm.a
 LINKLIBS=$(EXTRA_LIBS)
 
-
+APPNAME = jerry
 ASRCS = setjmp.S
-CSRCS =
 MAINSRC = jerry_main.c
 
 AOBJS = $(ASRCS:.S=$(OBJEXT))
@@ -130,8 +118,6 @@ else
   INSTALL_DIR = $(BIN_DIR)
 endif
 
-CONFIG_JERRYSCRIPT_PROGNAME ?= jerry$(EXEEXT)
-PROGNAME = $(CONFIG_JERRYSCRIPT_PROGNAME)
 
 ROOTDEPPATH	= --dep-path .
 
@@ -139,8 +125,9 @@ ROOTDEPPATH	= --dep-path .
 
 VPATH		=
 
-all:	.built
-.PHONY: context depend clean distclean
+
+all:	copylibs .built
+.PHONY: copylibs context depend clean distclean
 
 $(AOBJS): %$(OBJEXT): %.S
 	$(call ASSEMBLE, $<, $@)
@@ -152,6 +139,9 @@ $(COBJS) $(MAINOBJ): %$(OBJEXT): %.c
 	$(call ARCHIVE, $(BIN), $(OBJS))
 	$(Q) touch .built
 
+copylibs:
+	cp $(JERRYSCRIPT_ROOT_DIR)/build/lib/lib*.a $(TOPDIR)/../build/output/libraries/
+
 install:
 
 context:

targets/tizenrt-artik053/apps/jerryscript/jerry_main.c

@@ -21,7 +21,6 @@
 #include "jerryscript.h"
 #include "jerryscript-ext/handler.h"
 #include "jerryscript-port.h"
-#include "jmem.h"
 #include "setjmp.h"
 
 #include <apps/shell/tash.h> // To register tash command
@@ -63,7 +62,7 @@ print_help (char *name)
 /**
  * Read source code into buffer.
  *
- * Returned value must be freed with jmem_heap_free_block if it's not NULL.
+ * Returned value must be freed if it's not NULL.
  * @return NULL, if read or allocation has failed
  *         pointer to the allocated memory block, otherwise
  */
@@ -96,7 +95,7 @@ read_file (const char *file_name, /**< source code */
 
   rewind (file);
 
-  uint8_t *buffer = jmem_heap_alloc_block_null_on_error (script_len);
+  uint8_t *buffer = (uint8_t *) malloc (script_len);
 
   if (buffer == NULL)
   {
@@ -110,7 +109,7 @@ read_file (const char *file_name, /**< source code */
   if (!bytes_read || bytes_read != script_len)
   {
     jerry_port_log (JERRY_LOG_LEVEL_ERROR, "Error: failed to read file: %s\n", file_name);
-    jmem_heap_free_block ((void*) buffer, script_len);
+    free ((void*) buffer);
 
     fclose (file);
     return NULL;
@@ -458,12 +457,12 @@ jerry_cmd_main (int argc, char *argv[])
       if (jerry_value_has_error_flag (ret_value))
       {
         print_unhandled_exception (ret_value, source_p);
-        jmem_heap_free_block ((void*) source_p, source_size);
+        free ((void*) source_p);
 
         break;
       }
 
-      jmem_heap_free_block ((void*) source_p, source_size);
+      free ((void*) source_p);
 
       jerry_release_value (ret_value);
       ret_value = jerry_create_undefined ();