Espruino

img

new jolt image

2024-06-19 08:31:23 +01:00

pins

new board : STem Cell introduction with its pin definitions

2017-09-25 14:44:37 +02:00

.gitignore

#606 . Initial framework for SPI hardware support.

2015-11-03 23:04:56 -06:00

BANGLEJS2_IFLASH.py

Add a Bangle.js 2 build that uses internal flash for storage of app JS files

2024-06-03 16:21:48 +01:00

BANGLEJS2_LINUX.py

linux build for Bangle.js2 (good for testing 3 bit graphics lib)

2022-11-05 10:50:13 +00:00

BANGLEJS2_NOFLASH.py

fix board name on noflash build

2024-07-12 09:20:04 +01:00

BANGLEJS2.py

Fix for unexpected power draw on newest batch of Bangle.js devices

2024-07-01 11:56:55 +01:00

BANGLEJS.blocklist

oops

2023-08-18 14:04:27 +01:00

BANGLEJS.py

Bangle.js1: Switch to space-optimised sin/atan/atan2 to save enough space to continue building

2024-08-29 16:56:13 +01:00

CURIO.py

misc tweaks for curio build

2024-07-25 14:36:00 +01:00

DICKENS.py

Merging Dickens-specific changes into master

2023-09-27 14:57:47 +01:00

DTNO1_F5.py

Bangle.js: Improved HRM calculations - swapped autocorrelation for bandpass filter

2021-04-29 14:58:38 +01:00

EMBED.py

Revert makefile ordering for FAMILY.make and generally tweak things to allow builds to work as before

2023-01-11 11:24:23 +00:00

EMSCRIPTEN2.py

Remove debugger from emulator

2024-05-09 12:36:42 +01:00

EMSCRIPTEN.py

Remove debugger from emulator

2024-05-09 12:36:42 +01:00

ESP32_IDF4.py

increase ESP32 IDF4 watchdog timeouts, remove un-needed extras for now

2024-05-09 10:10:55 +01:00

ESP32.py

ESP32 fix hard-coded ADC pins, get them from pinInfo (py file)

2024-05-15 14:51:31 +01:00

ESP32C3_IDF4.py

allow to switch between USB_CDC and UART for ESP32C3 boards

2024-08-28 20:49:23 +02:00

ESP32S3_IDF4.py

Adding Bluetooth and Neopixel

2024-08-18 21:39:07 +02:00

ESP8266_4MB.py

Remove debugger from emulator

2024-05-09 12:36:42 +01:00

ESP8266_BOARD.py

Saving space on ESP8266 build by pulling out FFT

2024-09-20 10:01:32 +01:00

ESP8266.blocklist

Saving space on ESP8266 build by pulling out FFT

2024-09-20 10:01:32 +01:00

ESPRUINOBOARD.net.blocklist

Microbit 1 builds now working again (firmware size)

2022-02-22 11:59:52 +00:00

ESPRUINOBOARD.py

For built-in symbols, pack string offset inside function pointer, saving 2 bytes/symbol if ESPR_PACKED_SYMPTR set (fix #2405 )

2024-03-14 13:55:37 +00:00

ESPRUINOWIFI.py

Pico/Wifi: Enabled JIT compiler

2023-03-10 09:55:12 +00:00

HEXBADGE.py

Updated required softdevice to allow DFU updates even if the bootloader is based on 3.1.0

2021-04-14 11:41:41 +01:00

HYSTM32_24.py

:( refactopring build for supported boards

2017-03-07 15:25:24 +00:00

HYSTM32_28.py

Added SAVE_ON_FLASH_EXTREME for HYSTM32_28, where we're now cutting out some Math.X functionality to keep builds going

2018-02-10 09:27:51 +00:00

HYSTM32_32.py

tweak - save some space to make builds easier

2022-02-16 09:13:29 +00:00

ID205.py

optional 12 bit gfx mode

2020-10-29 14:51:21 +00:00

JOLTJS.py

Jolt.js: ensure GPIO attached to outputs always default to input at startup

2024-06-20 14:31:59 +01:00

LINUX.py

Making pebble fonts defineable with ESPR_PBF_FONTS, add to ChangeLog

2023-06-06 16:49:23 +01:00

MDBT42Q.py

Add built-in Stepper motor handling with the Stepper class (if enabled in build)

2024-01-24 11:42:49 +00:00

MICROBIT1.blocklist

free up some more memory for micro:bit 1 build again

2022-07-05 11:12:45 +01:00

MICROBIT1.py

Remove debugger from emulator

2024-05-09 12:36:42 +01:00

MICROBIT2.py

Microbit2: Set up SCK/LRCK to unused pins for neopixel to ensure neopixel will work ok

2023-12-18 10:02:26 +00:00

NRF51822DK.py

move reset pin option

2018-02-06 15:47:35 +00:00

NRF52832DK.py

add JIT to DK build

2023-08-04 16:20:55 +01:00

NRF52840DK.py

Finally sorted out SDK15 bootloader - we were assuming for DFU that we had a crystal oscillator

2023-12-19 15:47:47 +00:00

NUCLEOF401RE.py

Move Nucleo flash base back to 0x08000000 for bootloader

2024-06-12 16:05:42 +01:00

NUCLEOF411RE.py

Move Nucleo flash base back to 0x08000000 for bootloader

2024-06-12 16:05:42 +01:00

PICO_R1_3.py

Tweaks to ensure the build still fits on these devices

2024-09-20 09:17:47 +01:00

PIXLJS.py

Tweaks to ensure the build still fits on these devices

2024-09-20 09:17:47 +01:00

PUCKJS_LITE.py

Puck.js Lite: remove NFC from build (no NFC on board the Lite version)

2022-09-28 10:14:15 +01:00

PUCKJS_MINIMAL.py

typo

2023-10-25 11:53:51 +01:00

PUCKJS.py

Skip CRT startup code for Puck.js to save some space, as suggested in 49c88c356d (commitcomment-143719757)

2024-07-02 09:08:20 +01:00

RAK5010.py

Typos

2022-07-27 13:31:13 +02:00

RAK8211.py

Updated required softdevice to allow DFU updates even if the bootloader is based on 3.1.0

2021-04-14 11:41:41 +01:00

RAK8212.py

Updated required softdevice to allow DFU updates even if the bootloader is based on 3.1.0

2021-04-14 11:41:41 +01:00

RASPBERRYPI.py

doc tweaks - ready for merge

2022-05-12 13:49:01 +01:00

RUUVITAG.py

Updated required softdevice to allow DFU updates even if the bootloader is based on 3.1.0

2021-04-14 11:41:41 +01:00

SMARTIBOT.py

Fix smartibot build

2021-12-15 09:20:29 +00:00

STM32F3DISCOVERY.py

Fix bug in pin_utils.py's only_from_package() function, which in turn fixes a hard fault handler in STM32F3DISCOVERY.

2019-04-12 20:00:35 -03:00

STM32F4DISCOVERY.py

Add filesystem support to STM32F4DISCOVERY.

2019-04-12 20:05:17 -03:00

STM32L496GDISCOVERY.py

make SHA256/512 switchable

2018-04-26 09:14:30 +01:00

STM32L496STEMCELL.py

make SHA256/512 switchable

2018-04-26 09:14:30 +01:00

STM32VLDISCOVERY.py

Reduce available variable count on STM32VL - we were too low on RAM

2018-07-02 08:54:23 +01:00

THINGY52.py

ensure thingy still builds

2024-06-12 09:28:04 +01:00

WIO_LTE.py

update image for seeed

2018-10-09 08:43:23 +01:00